ATOMFAIR® PTP-395 POWDER TABLET PRESS (0−15 TON)RESEARCH GRADE MATERIAL
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
If you’re interested, have any questions, or have specific customization requirements, please feel free to contact us.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Column alignment and load calibration must be verified before each compression cycle to prevent mechanical overload. The non-sealed hydraulic design suppresses oil migration, but exposure to volatile solvents must be avoided to maintain seal integrity.
- Alignment Verification: Verify column alignment using a straight edge before each use to ensure uniform load distribution.
- Load Calibration Check: Confirm load calibration by checking the pressure gauge reading against a known standard prior to peak compression.
- Surface Cleanliness: Maintain clean internal mating surfaces by wiping with a lint-free cloth to prevent sample contamination.
- Solvent Avoidance: Avoid operating near volatile chemical solvents to prevent degradation of hydraulic seals.
- Controlled Environment: Use this equipment only in controlled laboratory environments for scientific research and prototyping.
This procedure outlines the safe initialization and compression steps for the powder tablet press. Follow each step sequentially to ensure mechanical integrity and sample quality.
Required Equipment: Powder Tablet Press (PTP-395), Digital Pressure Gauge Module (optional)
- Verify Column Alignment
Inspect column alignment using a straight edge to ensure the press is level and properly oriented. - Confirm Load Calibration
Check the pressure gauge reading against a known calibration standard to confirm accurate load measurement. - Clean Mating Surfaces
Wipe internal mating surfaces with a clean, lint-free cloth to remove any debris or residue. - Apply Compression
Place the die set containing the powder sample on the press and gradually apply compression to the target force. - Hold and Release
Hold the compression force for the required dwell time, then slowly release the pressure to extract the pellet.
How does the non-sealed hydraulic connection design in the PTP-395 affect oil leakage and contamination in cleanroom or glove box environments compared to sealed designs?
The non-sealed internal hydraulic connection design isolates fluid paths to drastically suppress oil leakage over extended lifespans, eliminating contamination inside clean setups. This makes it ideally suited for glove box deployment, but it does require maintaining clean mating surfaces and avoiding volatile chemical solvents as per the operating guidelines.
Can the PTP-395 be used with automated press systems or custom pellet molds for specialized sample preparation?
The PTP-395 is part of the infrared sample preparation accessories series and is compatible with custom pellet molds, which are available upon request. While it is a standalone manual press, the manufacturer offers related automated press solutions as alternatives. Users should ensure proper column alignment and load checks before operation.
What safety precautions are required when operating the PTP-395 powder tablet press at maximum load?
Before applying peak compression parameters, ensure total column alignment and perform a load check verification. Maintain clean internal mating surfaces and avoid operating near volatile chemical solvents. The equipment is designed for research and prototyping only, with ultra-low routine maintenance overheads.
The Atomfair PTP-395 powder tablet press offers a 0-15 ton capacity with a compact, lightweight design suitable for glove box use, and a non-sealed hydraulic system to minimize oil leakage. However, it requires careful alignment checks before peak loading and should not be used near volatile solvents.
Positive
- Non-sealed hydraulic design: The non-sealed connection design isolates internal fluid paths to drastically suppress hydraulic oil leakage, preventing contamination in clean lab setups.
- Compact and lightweight: With a 28 kg weight and small footprint (225×155×380 mm), the press is easy to port and integrate into confined spaces like glove boxes for inert atmosphere operations.
Trade-offs
- Alignment verification required: Operators must ensure total column alignment and load check verification before applying peak compression parameters to maintain safety and repeatability.
- Avoid volatile solvents: The equipment should not be operated near volatile chemical solvents, limiting its use in certain chemical environments and requiring careful lab placement.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
