|
Osmium (Os) Evaporation Material, Pieces, 99.95%, 1-3 mm
Product Type: Pure Metal Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This material requires dedicated crucible or liner selection via RFQ and EHS review before use in e-beam or thermal evaporation. Deposition source compatibility and process route must be matched to the material's high melting point (3,045°C) and film requirements.
- Evaporation Method Restriction: E-beam or thermal evaporation may only be used after an environmental health and safety review.
- Crucible/Liner Requirement: A dedicated crucible or liner must be specified and obtained via request for quotation for each deposition run.
- Deposition Source Compatibility: The evaporation source hardware must be confirmed compatible with the material's physical form (pieces, 1–3 mm) and melting point.
- Process Route Matching: The evaporation process route must be selected based on material behavior, melting point, and desired film properties.
- Procurement Confirmation: Before quotation, the model, purity, form, size range, pack size, and deposition-source compatibility must be verified.
What are the key performance trade-offs when using 99.95% pure Osmium evaporation pieces for E-beam versus thermal evaporation?
Osmium (Os) has a melting point of 3,045 °C and a density of 22.48 g/cm³, which imposes significant thermal load and crucible compatibility constraints. The product is specified for E-beam or thermal evaporation only after an EHS review, and requires a dedicated crucible/liner by RFQ. The 1-3 mm piece form supports source loading but the high melting point and density make E-beam the more practical method for controlled deposition, while thermal evaporation may require specialized refractory liners and careful power management to avoid source damage.
What compatibility constraints exist for integrating this Osmium evaporation material with existing deposition hardware?
The product requires a dedicated crucible or liner obtained by RFQ, and the evaporation method is limited to E-beam or thermal only after an environmental health and safety (EHS) review. Buyers must confirm deposition source geometry, including crucible dimensions and liner material compatibility with osmium's high melting point (3,045 °C) and density (22.48 g/cm³), before quotation. The 1-3 mm piece size is designed for standard source loading but may not fit all pocket configurations without prior verification.
What handling, safety, and storage infrastructure is required for 99.95% pure Osmium pieces in a laboratory setting?
Osmium is a dense (22.48 g/cm³), high-melting-point (3,045 °C) pure metal that requires dedicated crucible/liner use and an EHS review before any evaporation process. The product is supplied in pack sizes of 100g, 500g, or 1kg, and buyers should confirm certificate requirements, safety data sheet availability, shipment conditions, and export requirements before quotation. Standard laboratory handling for dense metal pieces applies, but the high toxicity of osmium tetroxide formed during oxidation necessitates strict fume hood use and personal protective equipment during handling and storage.
Atomfair's Osmium (Os) Evaporation Material is a research-grade pure metal supplied as 99.95% purity 1-3 mm pieces for vacuum thin-film deposition. Its high melting point and density require dedicated hardware and EHS review, making it suitable for specialized laboratory applications where precise material properties are critical.
Positive
- Defined purity and material identity: Osmium (Os) evaporation material is supplied with 99.95% purity and clear material specification, enabling precise procurement and deposition-process matching for research-grade thin-film applications.
- Controlled physical form for deposition: Supplied as 1-3 mm pieces, the form factor facilitates source loading and evaporation review, supporting consistent material feed in E-beam or thermal evaporation systems.
Trade-offs
- Requires dedicated crucible and EHS review: The material is specified for use with a dedicated crucible/liner by RFQ and only permits E-beam or thermal evaporation after an environmental health and safety review, adding preparatory steps before deployment.
- High melting point and density impose hardware constraints: With a melting point of 3,045°C and density of 22.48 g/cm³, the evaporation source hardware and process route must be carefully matched to material behavior, potentially limiting compatibility with standard systems.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
