|
Nickel Oxide (NiO) Evaporation Material, Powder, 99.995%, 45 µm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This material requires careful selection of evaporation source hardware and method to ensure consistent thin-film deposition. Confirm deposition source geometry, liner or boat compatibility, and process route before ordering.
- Deposition Source Compatibility: Use an E-beam hearth with a graphite, Al2O3, or BN liner, or a W, Mo, or Ta boat for thermal evaporation.
- Evaporation Method Preference: E-beam evaporation is preferred; thermal evaporation is available only by request for quotation.
- Material Behavior Considerations: The melting point of 1,984°C and Z-Ratio of 1.00 influence evaporation rate and film thickness control.
- Particle Size Impact: The 45 µm powder size affects source loading density and evaporation uniformity.
- Procurement Verification: Buyers must confirm model, purity, form, size range, pack size, and deposition-source compatibility before quotation.
What is the recommended evaporation method for this NiO powder, and how does the Z-ratio of 1.00 affect process control?
The preferred evaporation method is E-beam evaporation, as indicated by the Z-ratio of 1.00, which is typical for E-beam rate monitoring. Thermal evaporation is available by RFQ with appropriate hardware (W/Mo/Ta boat or E-beam hearth with graphite/Al2O3/BN liner). The Z-ratio of 1.00 simplifies thickness monitoring, as it indicates a direct correlation between crystal frequency and deposited mass, reducing the need for empirical calibration during deposition.
Which evaporation source liners or boats are compatible with this 45 µm NiO powder?
The product is compatible with E-beam evaporation using a hearth lined with graphite, Al2O3, or BN, or with thermal evaporation using W, Mo, or Ta boats. The 45 µm powder form is suitable for direct loading into these sources, but buyers should confirm source geometry and may consider pre-compaction for thermal boats to avoid particle loss or spitting during evaporation.
What safety and storage considerations are required for this 99.995% pure Nickel Oxide powder?
As a research-grade nickel compound, this powder requires handling in a fume hood or glovebox to avoid inhalation. The safety data sheet (SDS) should be reviewed for specific hazards. Storage should be in a sealed, dry container away from reducing agents. The product is supplied with documentation including certificate and SDS upon request, and shipment conditions can be reviewed against laboratory use requirements.
Nickel Oxide (NiO) evaporation material in powder form (45 µm, 99.995% purity) is specified for e-beam deposition with a high melting point of 1,984°C, requiring careful source hardware matching and limited thermal evaporation compatibility.
Positive
- High purity 99.995%: The 99.995% purity specification reduces contaminant introduction during thin-film deposition, supporting consistent film stoichiometry and electrical properties.
- Controlled particle size 45 µm: The defined 45 µm powder size promotes uniform source loading and predictable evaporation rates, important for reproducibility in laboratory deposition runs.
Trade-offs
- Preferred e-beam evaporation method: Thermal evaporation requires a request-for-quotation process, limiting direct compatibility with standard thermal boats and adding procurement lead time for non-e-beam setups.
- High melting point requires robust hardware: The 1,984°C melting point necessitates high-power e-beam sources or specialized boat liners (graphite/Al2O3/BN), increasing infrastructure demands and process validation steps.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
