|
Nickel (Ni) Evaporation Material, Pieces, 99.99%, 3-6 mm
Product Type: Pure Metal Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This nickel evaporation material requires careful matching to deposition source hardware and process parameters to avoid contamination or inefficient film growth. Users must confirm compatibility with boat, crucible, or e-beam hearth materials and source geometry before use.
- Source Material Compatibility: Select an evaporation source material (Mo, W, Ta, graphite, or alumina) that is chemically compatible with molten nickel to prevent alloying or crucible degradation.
- Particle Size Fit: Ensure the 3–6 mm piece size aligns with the source cavity dimensions to allow uniform loading and consistent evaporation rates.
- Melting Point Requirement: The evaporation source must be capable of reaching and sustaining the 1,453 °C melting point of nickel without excessive thermal stress or failure.
- Z-Ratio for Thickness Monitoring: Use the Z-ratio of 0.331 to calibrate quartz crystal microbalance readings for accurate film thickness control during deposition.
- Process Route Selection: Choose thermal resistive or e-beam evaporation based on the required film purity, deposition rate, and substrate temperature constraints.
How does the melting point of 1453°C influence the choice of evaporation source for nickel?
Nickel's melting point of 1453°C requires a high-temperature evaporation source. The product is compatible with Mo/W/Ta boats, graphite/alumina crucibles, or e-beam hearths, all of which can withstand this temperature for thermal/resistive or e-beam evaporation.
What particle size range is recommended for nickel evaporation material to ensure uniform deposition?
The material is supplied as Pieces in the 3-6 mm size range. This size is specified to support consistent loading into evaporation sources and promote uniform evaporation during thermal or e-beam processes.
How does the density (8.9 g/cm³) and Z-ratio (0.331) of nickel affect quartz crystal monitor calibration during evaporation?
The density of 8.9 g/cm³ and Z-ratio of 0.331 are critical parameters for calibrating quartz crystal microbalances (QCM) used to monitor film thickness. The Z-ratio accounts for the acoustic impedance mismatch between the crystal and the deposited material, ensuring accurate thickness readings during nickel evaporation.
This Nickel evaporation material (99.99% purity, 3-6 mm pieces) is suitable for thermal or e-beam deposition using Mo/W/Ta boats or graphite/alumina crucibles. The high melting point (1,453°C) and Z-ratio (0.331) require careful process tuning for optimal film quality.
Positive
- High 99.99% purity: The 99.99% purity specification ensures minimal contamination in thin-film deposition, critical for research and device applications.
- Defined 3-6 mm piece size: The 3-6 mm piece size facilitates consistent loading into thermal boats, crucibles, and e-beam hearths, supporting reproducible evaporation rates.
Trade-offs
- High melting point 1,453°C: The melting point of 1,453°C requires high-temperature evaporation sources and may necessitate substrate heating or increased power density for efficient deposition.
- Z-ratio of 0.331: The Z-ratio of 0.331 affects deposition rate monitoring in e-beam systems; users must adjust process parameters for accurate film thickness control.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
