|
Nickel (Ni) Evaporation Material, Pieces, 99.95%, 3-6 mm
Product Type: Pure Metal Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This document details the technical constraints for using Nickel (Ni) Evaporation Material in vacuum thin-film deposition. Key constraints include deposition source compatibility, process route matching, and material-specific parameters affecting film quality.
- Deposition Source Compatibility: The material must be loaded into a Mo/W/Ta boat, graphite/alumina crucible, or e-beam hearth compatible with the evaporation system.
- Process Route Matching: Select thermal/resistive or e-beam evaporation based on the material's melting point (1453°C) and desired film properties.
- Material-Specific Parameters: The Z-ratio of 0.331 and density of 8.9 g/cm³ influence deposition rate calibration and film thickness uniformity.
- Infrastructure Requirement: A vacuum deposition system is required to achieve the necessary conditions for evaporation.
What is the significance of the Z-ratio of 0.331 for this nickel evaporation material in e-beam deposition?
The Z-ratio of 0.331 is a material-specific parameter used by quartz crystal microbalance (QCM) thickness monitors to accurately measure film thickness during e-beam evaporation. This value, provided in the technical specifications, must be entered into the deposition controller to ensure correct rate and thickness readings for nickel films.
Which boat or crucible materials are recommended for evaporating nickel at its melting point of 1,453°C?
For thermal or resistive evaporation of nickel at its melting point of 1,453°C, molybdenum (Mo), tungsten (W), or tantalum (Ta) boats are recommended. For e-beam evaporation, graphite or alumina crucibles or an e-beam hearth are suitable. These source materials are explicitly listed in the product specifications to ensure compatibility with the high melting point of nickel.
How does the piece size of 3-6 mm affect loading and evaporation performance for this nickel material?
The pieces are sized 3-6 mm to facilitate consistent loading into boats, crucibles, or e-beam hearths while providing sufficient surface area for controlled evaporation. This size range is specified to support uniform heating and minimize spitting or uneven deposition, which is critical for achieving reproducible thin-film properties in vacuum deposition processes.
This 99.95% pure nickel evaporation material in 3-6 mm pieces is suitable for thermal and e-beam deposition, but requires careful matching of source hardware and pre-order verification of specifications and documentation.
Positive
- High purity 99.95%: Nickel evaporation material with 99.95% purity minimizes contamination in thin-film deposition, supporting consistent film properties for research applications.
- Defined form and size range: Supplied as pieces 3-6 mm, suitable for loading into Mo/W/Ta boats, graphite/alumina crucibles, or e-beam hearths, providing flexibility across thermal and e-beam evaporation systems.
Trade-offs
- Source hardware compatibility required: Evaporation source hardware (boat, crucible, hearth) must be matched to the material's melting point (1,453°C) and deposition behavior to avoid operational issues; improper matching can lead to incomplete evaporation or source damage.
- Pre-order verification mandatory: Buyers must confirm model, purity, form, size range, pack size, and deposition-source compatibility before quotation, and review certificate, SDS, and shipment conditions against laboratory requirements.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
