|
Neodymium (Nd) Evaporation Material, Pellets, 99.9%, 1-10 mm
Product Type: Pure Metal Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This material requires specific deposition source hardware and process matching to ensure proper film formation. The pellets must be handled with attention to source compatibility and material behavior under vacuum.
- Source Compatibility: The evaporation material must be used with a Ta/W boat, Ta liner, or water-cooled e-beam hearth with liner.
- Method Selection: Deposition must be performed using e-beam or thermal/resistive evaporation as specified by RFQ.
- Process Matching: Evaporation source hardware and process route must be matched to the material's melting point and film requirements.
- Z-Ratio Calibration: The material's Z-ratio of 1.00 is required for accurate thickness monitoring during deposition.
- Procurement Verification: Before quotation, buyers must confirm model, purity, form, size range, deposition-source compatibility, and certificate requirements.
What is the significance of the Z-ratio value of 1.00 for neodymium evaporation material in thin-film deposition?
The Z-ratio of 1.00 provided in the product specifications is the standard baseline value for quartz crystal microbalance (QCM) thickness monitoring, simplifying film thickness measurement without requiring tooling factor adjustments. This value, combined with the material's density of 7.01 g/cm³ and melting point of 1,021°C, is essential for calibrating deposition rate and achieving consistent film properties during e-beam or thermal evaporation.
What boat or liner materials are recommended for thermal evaporation of neodymium pellets?
The product description specifies compatibility with tantalum (Ta) or tungsten (W) boats, Ta liners, or water-cooled e-beam hearths with liners for both e-beam and thermal/resistive evaporation. These materials are selected based on neodymium's melting point of 1,021°C and the requirement to avoid contamination from the source, as confirmed by the listed evaporation source options in the technical specifications.
What infrastructure and handling considerations are required when using 99.9% neodymium pellets in a research laboratory?
The product requires vacuum deposition infrastructure such as e-beam or thermal evaporation systems with compatible source hardware (Ta/W boat, Ta liner, or water-cooled e-beam hearth). The supplier provides a safety data sheet (SDS) upon request, and buyers should review shipment conditions, export requirements, and certificate needs before quotation. The pellet form (1-10 mm) reduces handling risks compared to powders, but standard procurement checks—including confirmation of model, purity, form, size range, pack size, and deposition-source compatibility—are mandatory as stated in the product documentation.
This evaluation assesses the Neodymium (Nd) evaporation material in pellet form (99.9% purity, 1-10 mm) for vacuum thin-film deposition, highlighting its defined material parameters and the operational constraints of source compatibility and process configuration.
Positive
- Defined Material Identity and Purity: Neodymium (Nd) with 99.9% purity ensures reproducible deposition conditions for thin-film applications requiring controlled composition.
- Pellet Form with Optimized Size Range: Pellets sized 1-10 mm facilitate uniform evaporation and are compatible with standard e-beam and thermal evaporation sources.
Trade-offs
- Deposition Source Compatibility Required: The melting point of 1021°C and material reactivity necessitate careful selection of evaporation source (Ta/W boat, Ta liner, water-cooled e-beam hearth) to prevent contamination or damage.
- Limited Process Flexibility: The pellet size range (1-10 mm) may require additional processing or specific source geometry to achieve consistent evaporation rates, particularly for small-scale or high-precision depositions.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
