|
Molybdenum (Mo) Evaporation Material, Wire, 99.95%, Dia. 1.0 mm
Product Type: Pure Metal Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Molybdenum wire evaporation material requires e-beam evaporation for optimal deposition; thermal evaporation is only suitable for thin charges under qualified setups. The material must be loaded into a water-cooled e-beam hearth or supported by tungsten or tantalum components, and deposition-source compatibility must be confirmed before use.
- Evaporation Method Constraint: E-beam evaporation is the preferred method; thermal evaporation is only permitted for thin charges with a qualified setup.
- Source Compatibility Requirement: The material must be used with a water-cooled e-beam hearth or a tungsten/tantalum support system, confirmed via RFQ.
- Process Matching Requirement: The evaporation source hardware and process route must be matched to the material's melting point, density, and Z-ratio.
Verify the material specifications and deposition source compatibility before loading the evaporation source. Match the process route to the material's melting point and film requirements to ensure consistent deposition.
Required Equipment: E-beam evaporation source with water-cooled hearth, Tungsten or tantalum support (for RFQ)
- Confirm specifications
Confirm the model, purity, form, size, and pack size against the deposition source requirements. - Review documentation
Review the certificate, safety data sheet, and shipment conditions for proper handling and storage. - Match process
Match the evaporation source hardware and process route to the material's melting point and film requirements. - Submit inquiry
Include the required model, purity, form, size, and quantity when requesting quotation support.
Why is e-beam evaporation preferred over thermal evaporation for Molybdenum (Mo) wire with 99.95% purity and 1.0 mm diameter?
E-beam evaporation is preferred for this molybdenum wire because of its high melting point (2,617°C) and density (10.2 g/cm³). The product specification explicitly states that e-beam evaporation is preferred; thermal evaporation is only recommended for thin charge or qualified setups using a water-cooled e-beam hearth or W/Ta support by RFQ. This ensures controlled deposition without damaging the source.
What deposition source hardware is compatible with Atomfair Molybdenum evaporation wire (AF-MOWIR-99951P0MM)?
The compatible evaporation source includes a water-cooled e-beam hearth or W/Ta support by RFQ. The product is supplied as wire with 1.0 mm diameter, which must be confirmed against the deposition source geometry before ordering. The Z-ratio of 0.257 is also a parameter for process control in e-beam evaporation.
What are the available pack sizes and minimum order quantity for this Molybdenum evaporation wire?
The available pack sizes are 100g, 500g, and 1kg, with a minimum order quantity of 100g. Indicative price tiers are USD 330 for 100g, USD 800 for 500g, and USD 1050 for 1kg. Buyers should confirm pack size, certificate requirements, and shipment conditions before quotation.
This 99.95% pure molybdenum wire with 1.0 mm diameter is designed for e-beam evaporation in vacuum thin-film deposition, featuring a melting point of 2,617°C, density 10.2 g/cm³, and Z-ratio 0.257. Thermal evaporation is restricted to thin charge or qualified setups, and buyers must verify deposition source geometry for compatibility.
Positive
- High-purity molybdenum wire: 99.95% purity with defined material identity and wire form (1.0 mm diameter) enables clear procurement matching and supports consistent thin-film deposition results.
- E-beam evaporation optimized: Preferred for water-cooled e-beam hearths, leveraging the wire form for straightforward source loading and controlled evaporation, with specified melting point and density for process design.
Trade-offs
- Thermal evaporation limited: Thermal evaporation is only suitable for thin charge or qualified setups, restricting straightforward use in standard thermal evaporators without engineering evaluation.
- Mandatory source geometry check: Buyers must confirm that their water-cooled e-beam hearth or W/Ta support matches the wire diameter and form, adding an upfront compatibility verification step before ordering.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
