|
Lutetium (Lu) Evaporation Material, Pieces, 99.99%, 1-10 mm
Product Type: Pure Metal Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Lutetium evaporation material must be used with compatible deposition sources including Ta/W boat, Ta liner, or water-cooled e-beam hearth with liner. Purity grade (99.99%), physical form (pieces 1-10 mm), and pack size must be verified against the intended evaporation method and process conditions.
- Deposition Source Compatibility: The material requires a Ta/W boat, Ta liner, or water-cooled e-beam hearth with liner for evaporation.
- Evaporation Method Selection: E-beam or thermal/resistive evaporation must be selected based on material melting point and film requirements.
- Purity Grade Verification: The 99.99% purity specification allows comparison between standard and high-purity grades for process matching.
- Pack Size and Quantity Confirmation: Available pack sizes are 100g, 500g, and 1kg, and the required quantity must be confirmed before ordering.
- Documentation and Compliance Review: Certificate of analysis, safety data sheet, shipment conditions, and export requirements should be reviewed against laboratory use.
What are the critical physical properties of Lutetium evaporation material that influence deposition process parameters?
Lutetium (Lu) evaporation material has a melting point of 1,663 °C and a density of 9.84 g/cm³. These properties, along with the 99.99% purity and 1-10 mm piece form, guide selection of evaporation method (E-beam or thermal/resistive by RFQ) and source hardware (Ta/W boat, Ta liner, or water-cooled e-beam hearth with liner) to achieve desired film characteristics.
Which evaporation source configurations are compatible with Lutetium metal pieces?
The Lutetium evaporation material is compatible with Ta/W boat, Ta liner, or water-cooled e-beam hearth with liner. The evaporation method can be E-beam or thermal/resistive evaporation, but must be confirmed by RFQ to match the deposition source geometry and process requirements.
What documentation and quality control information is available for Lutetium evaporation material?
Certificates of analysis, safety data sheets, shipment condition details, and export requirements can be reviewed against laboratory use requirements. Buyers should confirm certificate requirements and shipment conditions before quotation to ensure compliance with internal quality and safety standards.
This lutetium evaporation material (99.99% purity, 1-10 mm pieces) is suited for e-beam or thermal evaporation, but its high melting point (1663°C) requires careful source matching and process control to achieve consistent film deposition.
Positive
- High purity 99.99%: The 99.99% purity specification minimizes contamination in thin films, enabling reliable comparison with standard and high-purity grades for research-grade deposition.
- Defined piece size range: The 1-10 mm piece size is designed to support consistent source loading and evaporation review, facilitating uniform melting and deposition rates across common evaporation sources.
Trade-offs
- High melting point requires robust hardware: With a melting point of 1663°C, this material demands high-temperature evaporation sources such as e-beam or thermal boats/liners, increasing equipment complexity and process sensitivity.
- Source compatibility must be verified: The piece size and geometry require confirmation of compatibility with specific deposition source hardware (e.g., boat, liner, or e-beam hearth) to ensure uniform evaporation and avoid loading issues.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
