|
Inconel (Ni/Cr/Fe) Evaporation Material, Powder, Inconel grade by RFQ, 10-25 µm
Product Type: Alloy Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This Inconel alloy powder requires specific evaporation source hardware and process route matching to ensure proper film deposition. Compatibility with e-beam or thermal evaporation methods must be confirmed prior to use based on material behavior and melting point.
- Evaporation Method Preference: E-beam evaporation is the preferred method for this material; thermal or resistive evaporation requires RFQ confirmation.
- Evaporation Source Hardware: Use a water-cooled e-beam hearth with an Al2O3 or graphite liner; tungsten sheet hardware is specified; W/Ta boat may be used by RFQ.
- Material Form and Particle Size: The powder form with 10-25 µm particle size requires careful loading into the evaporation source to ensure uniform deposition.
- Procurement Verification: Confirm model, purity, form, size range, pack size, and deposition-source compatibility before placing a quotation.
- Application Matching: Match the evaporation source hardware and process route to the material's melting point of 1,425°C and film requirements.
Why is e-beam evaporation preferred over thermal/resistive evaporation for Inconel (Ni/Cr/Fe) powder with 10-25 µm particle size?
E-beam evaporation is preferred because it provides good performance with a water-cooled e-beam hearth using an Al2O3/graphite liner. Thermal/resistive evaporation is available by RFQ but may require different hardware such as W/Ta boats, and the source does not rate its performance as 'Good' for that method.
What evaporation source hardware is recommended for this Inconel powder?
The recommended hardware is a water-cooled e-beam hearth with an Al2O3/graphite liner for e-beam evaporation. For thermal/resistive evaporation by RFQ, tungsten or tantalum boats may be used. Sheet hardware options are tungsten. The specific configuration must be matched to the material's melting point (1,425 °C) and density (8.5 g/cm³).
What does 'Inconel grade by RFQ' mean in the context of this evaporation material?
It means the exact composition, purity, and tolerances are specified by the buyer through a request for quotation (RFQ), allowing customization between standard, high-purity, or other controlled grades to match specific deposition requirements. This is not a fixed grade but a procurement option defined during quotation.
This Inconel (Ni/Cr/Fe) evaporation material in powder form with 10-25 µm particle size is specified for e-beam evaporation with good performance using a water-cooled e-beam hearth and Al2O3/graphite liner, though thermal/resistive evaporation requires RFQ confirmation. The alloy's melting point of 1,425 °C and density of 8.5 g/cm³ define its thermal behavior and deposition rate control requirements.
Positive
- Defined alloy identity for process matching: The material is specified as Inconel (Ni/Cr/Fe) with a defined formula, enabling clear procurement and direct matching to deposition processes requiring this specific alloy composition.
- Specified particle size for source loading: The 10-25 µm powder form supports consistent source loading and evaporation behavior in e-beam systems, reducing variability in film deposition.
Trade-offs
- Thermal evaporation requires RFQ confirmation: While e-beam evaporation is preferred with good performance, thermal or resistive evaporation methods require RFQ confirmation, indicating potential compatibility issues or process adjustments needed for those routes.
- Purity and composition are RFQ-dependent: The purity and composition are listed as 'Inconel grade by RFQ,' meaning the exact grade is not fixed and must be confirmed during quotation, introducing a procurement step for buyers requiring specific purity levels.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
