|
270 L Constant Temperature Incubator with Touchscreen Control
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
The incubator must be installed in an environment with an ambient temperature between 5 °C and 35 °C and connected to a grounded AC 220 V, 50 Hz power supply. The working chamber temperature is limited to the range RT + 5 to 65 °C, and the unit includes high-temperature and over-temperature alarms for safe unattended operation.
- Environmental constraints: The incubator requires a working ambient temperature of +5 to +35 °C and adequate clearance around the 880 × 630 × 930 mm external dimensions for ventilation and access.
- Power supply constraints: The unit must be connected to a dedicated AC 220 V, 50 Hz power supply rated for 750 W with proper grounding.
- Temperature range constraints: The temperature control range is limited to RT + 5 to 65 °C with a fluctuation of ±0.5 °C and uniformity of ±1.5 °C at 37 °C.
- Accessibility constraints: The chamber, sensors, shelves, filters, doors, test ports, and control interfaces must remain accessible for cleaning, inspection, and operation.
- Transport constraints: During transport, the packed unit must be kept upright and moved using suitable lifting equipment to prevent impact damage.
This procedure covers the initial setup and safe operation of the incubator. Follow these steps to ensure proper installation, stabilization, and routine use.
Required Equipment: Lifting equipment, Grounded AC 220 V power outlet
- Inspect installation site
Confirm that the installation site accommodates the 880 × 630 × 930 mm external dimensions and provides a grounded AC 220 V, 50 Hz power supply. - Position the incubator
Position the incubator on a level, stable surface and ensure adequate clearance for ventilation and access to the control interfaces. - Connect power
Connect the unit to the specified power supply and verify that the touchscreen controller powers on. - Set temperature parameters
Set the desired target temperature and any programmable time settings using the 4.3-inch intelligent touchscreen controller. - Stabilize chamber
Allow the chamber to reach the set temperature and stabilize for at least 30 minutes before loading samples. - Load samples
Place samples onto the provided shelves, ensuring proper airflow distribution and avoiding overloading. - Monitor alarms
Monitor the display for high-temperature or over-temperature alarms during operation and respond according to the user manual.
What are the temperature uniformity and fluctuation specifications for the Atomfair AF-CTIN-270 270 L constant temperature incubator with touchscreen control?
The incubator achieves a temperature uniformity of ±1.5 °C at 37 °C and a temperature fluctuation of ±0.5 °C, with a resolution of 0.1 °C. This performance is supported by forced convection airflow with an adjustable circulation fan, which improves temperature response speed and chamber uniformity across the 600 × 500 × 750 mm working chamber.
Can the 270 L constant temperature incubator be integrated with external data logging or sterilization systems?
Yes, the incubator supports optional accessories including a UV sterilization system, an embedded printer, U-disk data storage, an RS485 interface with communication software, and an independent over-temperature controller. These options allow integration into contamination-control routines and external data acquisition workflows without modifying the base chamber design.
What are the installation space and power requirements for the 270 L forced convection incubator?
The incubator has external dimensions of 880 × 630 × 930 mm (W × D × H) and requires a dedicated AC 220 V, 50 Hz power supply with a rated power of 750 W. The working ambient temperature range is +5 to +35 °C, and the chamber must be positioned with accessible clearance for cleaning, inspection, and operation of the control interfaces and test ports.
The 270 L constant temperature incubator (AF-LE-E-CTIN-0270-T270) uses forced convection airflow and a 4.3-inch touchscreen controller for programmable incubation cycles, with a stainless steel chamber and inner glass door for observation and cleaning. However, the ±1.5°C temperature uniformity at 37°C limits precision for sensitive assays, and the power supply and ambient temperature constraints (AC 220V, 50 Hz; +5 to +35°C) require careful lab infrastructure planning.
Positive
- Forced convection airflow: Forced convection improves temperature response speed and chamber uniformity, supporting reliable constant temperature incubation and sample holding.
- Touchscreen programmable controller: The 4.3-inch intelligent touchscreen enables multi-step temperature and time programming, simplifying routine operation for microbiology and general incubation workflows.
Trade-offs
- Moderate temperature uniformity: Temperature uniformity is ±1.5°C at 37°C, which may be insufficient for applications requiring tight thermal gradients, such as enzyme kinetics or cell culture.
- Restrictive installation requirements: The incubator requires AC 220V, 50 Hz power and a working ambient temperature range of +5 to +35°C, limiting placement options in labs with non-standard electrical or environmental conditions.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
