Atomfair-SD5180 Semi-Automatic Electrode Die Cutter
Product Overview
Atomfair-SD5180 Semi-Automatic Electrode Die Cutter is easy to operate, an efficient mass-production equipment for forming soft-pack positive and negative electrode sheets. It is also a convenient, fast multi-functional experimental and production equipment for forming soft-pack lithium battery positive and negative electrode sheets in laboratories.
Functional Features
- Equipped with infrared positioning device for accurate and convenient electrode sheet positioning and die cutting
- Easy and quick die replacement
- Long die service life, ≥30,000 times under normal use
- No quality defects such as burrs, powder falling or indentation
- Between manual and fully automatic, high efficiency of 800~2000 sheets per hour (1~8 sheets can be punched each time according to the size of the electrode sheet, standard is 2 sheets)
- Adopts four guide pillar structure, smooth up and down sliding with high precision
- The equipment feed inlet is equipped with a safety protection light curtain, making operation very safe
- Exquisite appearance, sheet metal adopts three-dimensional geometric design, simple and beautiful
- Easy operation, safe and reliable, small in size
Technical Parameters
| Parameter Item | Specification |
|---|---|
| Power Supply | 220V/50Hz |
| Power | 100W |
| Compressed Air | 0.5Mpa-0.8Mpa |
| Maximum Cutting Size | 280*180mm (maximum cutting size can be customized without limitation on request) |
| Booster Cylinder | 3T |
| Cutting Precision | ±0.1mm |
| Overall Dimension | L550mm*W455mm*H900mm |
| Equipment Weight | 180kg |
If you’re interested, have any questions, or have specific customization requirements, please feel free to contact us at inquiry@atomfair.com.
This equipment requires a compressed air supply of 0.5-0.8 MPa and a 220V/50Hz power source. The integrated safety light curtain at the feed inlet must remain unobstructed during operation to prevent injury.
- Compressed Air Requirement: The die cutter requires a compressed air supply of 0.5-0.8 MPa to actuate the 3T booster cylinder.
- Safety Light Curtain: The safety light curtain at the feed inlet must be kept clear of obstructions to prevent unintended operation.
- Die Life Expectancy: The die is rated for at least 30,000 cutting cycles under normal use before replacement is recommended.
This procedure covers the safe setup and operation of the semi-automatic electrode die cutter. It includes steps for connecting utilities, positioning the electrode sheet, and initiating the cutting cycle.
Required Equipment: Atomfair-SD5180 Semi-Automatic Electrode Die Cutter, Infrared positioning device
- Connect utilities
Connect the equipment to a 220V/50Hz power supply and a compressed air line regulated to 0.5-0.8 MPa. - Verify safety systems
Verify that the safety light curtain at the feed inlet is clear of obstructions and the emergency stop is released. - Position the electrode sheet
Place the electrode sheet on the cutting platform and use the infrared positioning device to align it with the die. - Initiate the cutting cycle
Activate the cutting cycle by pressing the dual-hand start buttons, ensuring hands remain clear of the die area. - Remove the cut electrode
Remove the cut electrode sheet from the die area after the ram returns to the top position.
What is the maximum cutting size and precision of the Atomfair-SD5180 Semi-Automatic Electrode Die Cutter?
The maximum cutting size is 280*180mm, which can be customized without limitation on request. The cutting precision is ±0.1mm, ensuring accurate electrode sheet formation.
What are the compressed air and power requirements for operating the Atomfair-SD5180?
The equipment requires a compressed air supply of 0.5Mpa-0.8Mpa and operates on a 220V/50Hz power supply with a power consumption of 100W. These specifications are essential for proper installation and operation.
How does the Atomfair-SD5180 ensure operator safety during high-throughput electrode cutting?
The equipment is equipped with a safety protection light curtain at the feed inlet, which enhances operational safety. Additionally, the four guide pillar structure ensures smooth and precise sliding, reducing the risk of accidents during high-speed operation.
The Atomfair-SD5180 Semi-Automatic Electrode Die Cutter delivers a balanced throughput of 800–2000 sheets per hour with ±0.1 mm cutting precision, supported by an infrared positioning system and a four-guide-pillar structure for consistent die alignment. Its 3T booster cylinder and hardened die (≥30,000 cycles) make it suitable for soft-pack electrode fabrication, though it requires a compressed air supply of 0.5–0.8 MPa and a 220V/50Hz power source, and its 180 kg footprint demands stable bench or floor mounting.
Positive
- High-throughput semi-automated cutting: Achieves 800–2000 sheets per hour with 1–8 sheets punched per cycle (standard 2), bridging manual and fully automatic systems for efficient soft-pack electrode production.
- Precision and die durability: Infrared positioning and a four-guide-pillar structure maintain ±0.1 mm cutting accuracy, while the die sustains ≥30,000 cycles under normal use without burrs, powder, or indentation defects.
Trade-offs
- Requires compressed air infrastructure: Operation depends on a 0.5–0.8 MPa compressed air supply, adding a utility requirement that may not be available in all laboratory settings.
- Fixed footprint and power specifications: The 180 kg unit with 220V/50Hz power and 550×455×900 mm dimensions requires dedicated bench space and electrical compatibility, limiting portability and installation flexibility.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
