ATOMFAIR HPS386 HOT PRESS SHAPING MACHINERESEARCH GRADE EQUIPMENT
|
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The HPS386 requires a compressed air supply at 0.5–0.7 MPa and a dedicated AC 220V/50Hz power source. The copper heating surface must be kept clean and allowed adequate warm-up time for temperature stabilization before use.
- Pneumatic Supply Requirement: The machine requires a regulated compressed air source at 0.5–0.7 MPa for pneumatic pressure operation.
- Heating Surface Cleanliness: The copper heating element surface must be kept free of debris to ensure uniform heat transfer.
- Pressure Calibration: The pressure adjustment must be calibrated according to specific battery specifications to avoid over-compression.
- Electrical Safety: The machine operates on AC 220V/50Hz at 1 kW and requires proper electrical grounding and circuit protection.
- Warm-Up Procedure: Allow adequate warm-up time for temperature stabilization before initiating pressing cycles.
This procedure describes the safe initialization and operation of the hot press machine for soft-pack lithium battery flat pressing. Always consult the user manual for detailed instructions before first use.
Required Equipment: ATOMFAIR HPS386 Hot Press Shaping Machine, Compressed air supply (0.5-0.7 MPa), AC 220V/50Hz power source, Soft-pack lithium battery cells
- Connect utilities
Connect the compressed air supply at 0.5–0.7 MPa and plug the machine into a grounded AC 220V/50Hz outlet. - Set temperature and timer
Set the desired constant temperature and automatic hot pressing timer on the control panel. - Warm up the heating element
Allow the copper heating element to reach the set temperature and stabilize for the recommended warm-up period. - Place the battery cell
Position the soft-pack bare cell centrally on the lower heating plate within the 300×300 mm pressing area. - Adjust pressing pressure
Adjust the pressure regulator to the required force between 0 and 1 ton based on the battery specifications. - Initiate pressing cycle
Activate the pressing cycle to lower the upper heating plate and apply heat and pressure for the set duration. - Remove the pressed cell
After the timer expires and the press retracts, carefully remove the pressed cell from the heating plate.
What is the maximum pressure and effective pressing area of the ATOMFAIR HPS386 hot press shaping machine?
The HPS386 provides continuously adjustable pressure from 0 to 1 ton across an effective pressing area of 300 × 300 mm. This allows precise force selection for different soft-pack battery specifications and material thicknesses within that area.
What are the utility and infrastructure requirements for operating the HPS386?
The HPS386 requires an AC 220V/50Hz power supply at 1 kW and a compressed air supply of 0.5–0.7 MPa for pneumatic pressure operation. The machine's overall dimensions are 420 × 420 × 430 mm and it weighs 80 kg, so adequate bench space and air supply infrastructure must be planned.
How does the copper heating element and constant temperature auto-control benefit soft-pack battery pressing?
The copper heating element provides superior thermal conductivity, ensuring uniform temperature distribution across the full 300 × 300 mm pressing area for even flat pressing results. The constant temperature auto-control with timer maintains precise heating and automatic hot pressing timing, ensuring consistent shaping results across production batches without manual intervention.
The ATOMFAIR HPS386 Hot Press Shaping Machine is a compact, copper-platen thermal press designed for post-winding flat pressing of soft-pack lithium battery cells, offering continuously adjustable 0–1 T pressure over a 300×300 mm effective area with constant-temperature auto-timing control. Its 80 kg footprint and 300–500 cycles/hour throughput suit research and small-scale production, though it requires a 0.5–0.7 MPa compressed air supply and careful surface maintenance for uniform heat transfer.
Positive
- Copper heating element for uniform thermal transfer: The 300×300 mm copper platen provides high thermal conductivity, ensuring even temperature distribution across the effective pressing area for consistent flat pressing of soft-pack cells.
- Continuously adjustable 0–1 T pressure: Pressure can be precisely tuned across the full 0–1 ton range, allowing force optimization for different battery thicknesses and material specifications without discrete pressure steps.
Trade-offs
- Requires external compressed air supply: The pneumatic pressure system depends on a 0.5–0.7 MPa compressed air source, which must be available in the lab or production area; absence of this infrastructure prevents operation.
- Copper surface requires cleanliness and warm-up: The copper heating element must be kept free of debris to ensure uniform heat transfer, and adequate warm-up time is needed for temperature stabilization before pressing cycles; contamination or insufficient warm-up can compromise shaping consistency.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
