|
113 μm 110 mm×10 m Roll Aluminum-Plastic Film
POUCH CELL ALUMINUM-PLASTIC FILM
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Purchase ConfirmationConfiguration: Confirm thickness, width, and length before ordering. Quotation Check: Confirm the title dimensions and pack format before production or ordering release.
|
Brand: ATOMFAIR®
This pouch-cell aluminum-plastic film must be heat-sealed at 180–190°C with 0.2 MPa pressure for 2 seconds to achieve a seal strength exceeding 29.4 N/15 mm. The laminate structure requires a nylon/aluminum peel strength above 2 N/15 mm and an aluminum/CPP peel strength above 5 N/15 mm, with solvent retention below 5 mg/m² and moisture vapor transmission limited to 200 ppm over 5 years.
- Hot Sealing Condition: Hot sealing requires a temperature range of 180–190°C on heatsealing equipment.
- Heat Seal Strength: Heat seal strength must exceed 29.4 N/15 mm at 200°C, 0.2 MPa, and 2 seconds dwell time.
- Laminate Strength Requirements: Nylon/aluminum laminate strength must be greater than 2 N/15 mm, and aluminum/CPP laminate strength greater than 5 N/15 mm.
- Solvent Retention Limit: Solvent retention must be less than 5 mg/m² to prevent contamination.
- Moisture Vapor Transmission: Moisture vapor transmission rate is limited to 200 ppm over 5 years.
What heat sealing conditions are recommended for this 113 μm aluminum-plastic film to achieve optimal bond strength?
The recommended hot sealing condition is 180-190°C. At 200°C with 0.2 MPa pressure for 2 seconds, the heat seal strength exceeds 29.4 N/15 mm width, ensuring robust seals for pouch cell assembly.
What is the moisture vapor transmission rate of this 113 μm aluminum-plastic film and how does it affect pouch cell longevity?
The film has a moisture vapor and oxygen transmission rate of 200 ppm over 5 years, as specified in the quality inspection. This low transmission rate supports good electrical insulation and long-term stability of the pouch cell.
What is the minimum molding depth achievable with this 113 μm aluminum-plastic film for pouch cell forming?
The film achieves a molding depth of at least 5.0 mm, verified by quality inspection. This allows deep-drawing into pouch cell cavities, and the CPP/CPP slip factor of less than 1.0 facilitates handling during lamination.
This 113 μm aluminum-plastic laminate film provides robust barrier properties and high seal strength for small-format pouch cell assembly, but requires precise heat sealing equipment and is limited to 110 mm width.
Positive
- High laminate and heat seal strength: Nylon/Al laminate strength >2 N/15mm and Al/CPP >5 N/15mm; heat seal strength >29.4 N/15mm at 200°C ensures reliable pouch sealing for prototype assembly.
- Low moisture and oxygen transmission: Moisture vapor/O2 transmission rate of 200 ppm over 5 years provides long-term barrier performance critical for battery cell stability.
Trade-offs
- Precise heat sealing conditions required: Hot sealing at 180-190°C, 0.2 MPa, and 2 seconds demands calibrated equipment and strict process control to achieve specified seal strength.
- Limited width for large pouches: The 110 mm width restricts pouch cell size to small-format applications, requiring wider rolls for larger cell designs.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
