|
316L Stainless Steel Powder-Sintered Filter Plate, 50 µm Filtration Rating, Ø30 × 3 mm, 110 PPI, 5/10 pcs
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration-grade selection, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This filter plate requires careful handling to maintain filtration performance and structural integrity. Operating limits include a maximum temperature of 500°C and maximum working pressure of 3 MPa.
- Temperature Limit: Normal use temperature must not exceed 500°C to prevent material degradation.
- Pressure Limit: Maximum working pressure is 3 MPa; gradual pressure increase is recommended to avoid damage.
- Mechanical Protection: Avoid impact, scratching, or concentrated tool pressure on the porous surface.
- Cleaning Compatibility: Select physical or chemical cleaning methods compatible with the retained material and process medium.
- Flow Direction: Normal flow direction is from the outside surface toward the clean side.
Proper operation ensures filtration efficiency and extends service life. Follow these steps for initial setup, monitoring, and cleaning.
Required Equipment: Backblowing equipment, Backwashing equipment, Ultrasonic cleaner
- Confirm operating parameters
Confirm filtration rating, PPI, disc diameter, thickness, porosity, through-pore requirement, target flow, working pressure, temperature, and media compatibility before installation. - Increase pressure gradually
Gradually increase the working pressure to the desired level to avoid sudden stress on the porous structure. - Monitor filtration efficiency
Monitor filtration efficiency; if it falls below 50%, perform a validated backblowing or backwashing procedure. - Avoid mechanical damage
Avoid impact, scratching, or concentrated tool pressure on the porous surface during handling and cleaning. - Select cleaning method
Select a cleaning method—physical (backwashing, backblowing, ultrasonic) or chemical (dilute acid, alkali, surfactants, enzymes)—based on the retained material.
What is the maximum working pressure and temperature for the 316L stainless steel powder-sintered filter plate with 50 µm filtration rating?
The filter plate has a normal use temperature of ≤500 °C and a maximum working pressure of ≤3 MPa. These limits are based on the 316L stainless steel powder-sintered construction, which provides mechanical rigidity and self-supporting capability for compact assemblies.
Can this 50 µm, 110 PPI sintered filter plate be cleaned and reused, and what cleaning methods are compatible?
Yes, the metallic porous body can be regenerated using backblowing, backwashing, ultrasonic cleaning, or suitable chemical-cleaning procedures such as dilute acid, dilute alkali, oxidizing agents, surfactants, or enzymes. The cleanable design supports repeat use when surface damage, rapid pressurization, and incompatible cleaning chemicals are avoided.
What are the key dimensional and structural specifications of the Ø30 × 3 mm 316L sintered filter plate?
The plate has a diameter of 30 mm and thickness of 3 mm, with a 110 PPI pore density, 0.23 mm nominal pore spacing, 30–45% porosity, and bulk density of 4.4–5.6 g/cm³. The 316L material density is 8.0 g/cm³, and the filtration rating is 50 µm with uniform interconnected flow-through pores.
The 50 µm, 110 PPI 316L stainless steel powder-sintered filter plate in Ø30 × 3 mm format provides a rigid, cleanable porous medium with low initial resistance for compact filtration assemblies, but requires confirmation of flow, pressure, temperature and media compatibility before deployment.
Positive
- Stable 50 µm filtration with 110 PPI structure: Combines a 50 µm filtration rating with a 110 PPI porous structure featuring 0.23 mm nominal pore spacing, 30–45% porosity and interconnected flow paths, providing predictable particle retention with low initial resistance.
- Regenerable rigid 316L construction: The self-supporting powder-sintered 316L body can be welded, bonded or mechanically integrated, and supports repeat use through backblowing, backwashing, ultrasonic or compatible chemical cleaning procedures.
Trade-offs
- Operating limits require process confirmation: Normal use temperature is limited to ≤500 °C and maximum working pressure to ≤3 MPa, so buyers must confirm target flow, media compatibility and through-pore requirements before ordering.
- Cleaning and handling constraints on porous surface: Pressure must be increased gradually; if filtration efficiency drops below 50%, a validated backblowing or backwashing procedure is required, and impact, scratching or concentrated tool pressure on the porous surface must be avoided.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
