|
316L Stainless Steel Powder-Sintered Filter Plate, 100 µm Filtration Rating, Ø50 × 5 mm, 110 PPI, 1/5/10 pcs
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration-grade selection, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This filter plate requires operation within a temperature limit of 500°C and a maximum working pressure of 3 MPa to avoid structural failure. Media compatibility must be confirmed before use, and cleaning must be performed using validated backblowing, backwashing, ultrasonic, or chemical methods to prevent surface damage and maintain filtration efficiency.
- Temperature Limit: The normal use temperature must not exceed 500°C to prevent material degradation.
- Pressure Limit: The maximum working pressure is 3 MPa; rapid pressurization should be avoided to prevent structural damage.
- Filtration Efficiency Threshold: If filtration efficiency falls below 50%, a validated cleaning procedure must be initiated.
- Cleaning Compatibility: Chemical cleaning agents must be compatible with 316L stainless steel and the retained material; dilute acids, alkalis, surfactants, or enzymes are acceptable.
- Surface Damage Prevention: Avoid impact, scratching, or concentrated tool pressure on the porous surface to maintain integrity.
This procedure guides the operator through initial setup, gradual pressure increase, and cleaning steps to maintain optimal filtration performance. Proper cleaning and avoidance of surface damage extend the service life of the porous metal component.
Required Equipment: Backblowing system, Backwashing system, Ultrasonic cleaner
- Verify Operating Conditions
Confirm that the temperature, pressure, and media compatibility are within the specified limits before operation. - Gradual Pressurization
Increase pressure gradually during operation to avoid sudden pressure surges. - Initiate Cleaning Procedure
Initiate a validated backblowing or backwashing procedure when filtration efficiency falls below 50%. - Select Cleaning Method
Select an appropriate physical or chemical cleaning method based on the retained material and process medium.
What is the maximum working pressure and temperature for the 316L powder-sintered filter plate with 100 µm filtration rating?
The filter plate has a maximum working pressure of ≤3 MPa and a normal use temperature of ≤500 °C. These limits are specified for the Ø50 × 5 mm, 110 PPI, 100 µm rated 316L sintered porous medium, and must be confirmed against the target flow, media compatibility, and through-pore requirements before ordering.
Can this 316L sintered filter plate be cleaned and reused, and what cleaning methods are compatible?
Yes, the powder-sintered metallic media is designed for repeat use and can be regenerated by backblowing, backwashing, ultrasonic cleaning, or suitable chemical cleaning procedures. Compatible chemical options include dilute acid, dilute alkali, oxidizing agents, surfactants, or enzymes, but surface damage, rapid pressurization, and incompatible cleaning chemicals must be avoided to maintain performance.
What are the key dimensional and structural specifications of the 110 PPI filter plate that affect integration into a filtration assembly?
The plate is Ø50 × 5 mm with a 100 µm filtration rating, 110 PPI pore density, 0.23 mm nominal pore spacing, 30–45% porosity, and a bulk density of 4.4–5.6 g/cm³. The self-supporting 316L construction can be welded, bonded, or mechanically integrated, but flow direction is normally from the outside surface toward the clean side, and through-pore rate must be confirmed with required flow and pressure conditions.
This 316L stainless steel powder-sintered filter plate offers a 100 µm filtration rating with a 110 PPI porous structure in a Ø50 × 5 mm disc format, providing a rigid, cleanable, and reusable metallic filtration medium suitable for laboratory and process-filtration assemblies requiring elevated temperature tolerance up to 500 °C and working pressures up to 3 MPa.
Positive
- Cleanable and reusable metallic media: The powder-sintered 316L construction supports regeneration via backblowing, backwashing, ultrasonic cleaning, or chemical cleaning, enabling repeated use in compatible applications without replacement.
- High-temperature and pressure tolerance: Rated for normal use up to 500 °C and maximum working pressure of 3 MPa, this filter plate is suitable for demanding process environments where polymeric media would fail.
Trade-offs
- Requires careful handling and cleaning: The porous surface is susceptible to damage from impact, scratching, or concentrated tool pressure, and cleaning must be validated to avoid compromising filtration efficiency below 50%.
- Through-pore rate must be confirmed per application: The through-pore rate is not fixed and must be verified against required flow and pressure conditions, adding a pre-order engineering step for proper system integration.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
