Top-Light Laboratory Incubator 150 L, 5-60°C, ATOMFAIR®

Top-Light Incubator, 150 L

Research-grade laboratory product

Product Overview

Top-Light Incubator, 150 L is a practical chamber for plant growth, tissue culture, seed germination, cultivation, seedling raising, microbial culture and preservation, medicinal-material and building-material testing, insect rearing and quality inspection. It brings together 150 l of usable space, 5 to 60 C and 0 to 10000 lux (6 levels) illumination, so the chamber can keep samples in a steady, repeatable working condition.

The cabinet combines a visible glass inner door, cleanable stainless-steel surfaces and a top-light layout to make sample observation and chamber maintenance easier. The cabinet uses a mirror-finish stainless-steel inner chamber, a tempered-glass inner door, a cold-rolled steel exterior and top lighting, with an internal working room of 400 x 500 x 750 mm and an external footprint of 625 x 655 x 1420 mm. That combination of chamber size, shell build and liner material makes the unit easier to place, clean and use in routine laboratory work.

The family uses programmable temperature and light control to support plant-growth experiments and routine illuminated incubation. The stated input power is 600 W, and the timer range is 0 to 9999 min. It is well suited to the day-to-day work listed above, including culture, incubation, climate simulation or illuminated growth tasks, depending on the family.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-GZX150T
Capacity	150 L
Temperature Control Range	5 to 60 C
Temperature Resolution	0.1 C
Temperature Uniformity	+/- 1 C
Light Intensity	0 to 10000 Lux (6 levels)
Lighting Faces	2 faces
Controller	LCD microcomputer programmable controller
Chamber Material	Mirror-finish stainless-steel inner chamber
Exterior Shell	Cold-rolled steel shell with electrostatic powder coating
Power / Input	600 W
Power Supply	AC220V 50Hz
Timer Range	0 to 9999 min
Internal Dimensions	400 x 500 x 750 mm
External Dimensions	625 x 655 x 1420 mm
Net Weight	90 Kg
Shelves / Trays	2 shelves
Configuration Note	Top lighting and glass observation door support plant-growth experiments and daily visual inspection

Performance Features

Programmable control of temperature and light supports routine illuminated incubation workflows. This supports repeatable plant-growth and photoperiod experiments.
Top lighting helps create the illumination conditions needed for plant-growth experiments. This supports repeatable plant-growth and photoperiod experiments.
Mirror-finish stainless-steel chamber surfaces and a glass inner door support observation and cleaning. This helps with cleaning, corrosion resistance and long-term laboratory use.
Self-diagnosis, over-temperature self-limiting and power-off memory help protect the chamber during routine use. This helps preserve operation settings after power interruptions.
The series uses a clean cabinet structure with removable shelving for easier loading and maintenance. This supports more reliable day-to-day chamber use.
The same LCD operation framework keeps routine chamber control straightforward. This supports more reliable day-to-day chamber use.

APPLICATION SCOPE: Suitable for plant growth, tissue culture, seed germination, cultivation, seedling raising, microbial culture and preservation, medicinal-material and building-material testing, insect rearing and quality inspection in universities, laboratories, research institutes and quality-control environments that need controlled chamber performance.

HANDLING: Keep the chamber level, leave enough room for ventilation and confirm the selected shelf and lighting configuration before operation. Every unit is shipped with reinforced packaging for transport safety; keep the unit upright during unloading and positioning.

IMPORTANT NOTICE: When set temperature is 10 C or below, ambient temperature should not exceed 26 C. The page also states a general work environment of 5 to 40 C and relative humidity below 90%. Any quoted amount refers to the chamber body only and does not include freight. Freight should be confirmed separately according to the delivery destination.

LABORATORY PROCUREMENT SUPPORT

For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.

E-MAIL: inquiry@atomfair.com

Supplier: Atomfair

Brand: ATOMFAIR®

The incubator must be operated on a level surface with adequate ventilation and within an ambient temperature range of 5 to 40°C and relative humidity below 90%. When the set temperature is 10°C or below, the ambient temperature must not exceed 26°C to maintain stability.

Leveling and Ventilation: The incubator must be placed on a level surface with sufficient clearance around the cabinet for adequate ventilation.
Ambient Temperature Limits: The ambient temperature must be maintained between 5°C and 40°C with relative humidity below 90%; when the set temperature is 10°C or below, the ambient temperature must not exceed 26°C.
Transport and Positioning: The unit must be kept upright during unloading and positioning to prevent damage to the refrigeration system.
Electrical and Safety Systems: The incubator requires a 220V 50Hz power supply and includes over-temperature self-limiting and power-off memory protection.
Shelf and Lighting Configuration: Confirm the shelf arrangement and lighting level before operation to ensure proper airflow and illumination for the samples.

HowTo

This procedure describes the initial setup and safe operation of the incubator for illuminated incubation tasks. Follow these steps to position, configure, and start the chamber for routine use.

Required Equipment: Top-Light Incubator, 150 L

Position the incubator
Position the incubator on a level, stable surface with adequate clearance for ventilation.
Connect to power
Connect the power cord to a properly grounded AC220V 50Hz outlet rated for 600 W.
Set temperature and light
Set the desired temperature and light intensity using the LCD controller, ensuring the ambient temperature does not exceed 26°C if the set temperature is below 10°C.
Load samples
Arrange the shelves and load samples, ensuring even weight distribution and unobstructed airflow.
Start the program
Close the glass door and start the program; verify that the chamber reaches the set conditions within the specified uniformity.

FAQ

What is the maximum ambient temperature allowed when the Top-Light Incubator 150 L is set to 10°C or below?

When the set temperature is 10°C or below, the ambient temperature must not exceed 26°C. The general work environment is 5 to 40°C with relative humidity below 90%, but this low-temperature setpoint requires a stricter ambient limit to maintain performance and prevent condensation or thermal overload.

Can the Top-Light Incubator 150 L be used for non-illuminated microbial culture?

Yes, the incubator supports microbial culture and preservation as stated in its application scope. The light intensity can be set to 0 lux (off), and the programmable controller allows dark incubation cycles. The temperature control range of 5 to 60°C and ±1°C uniformity are suitable for routine microbial work without illumination.

What safety mechanisms protect the Top-Light Incubator and its samples during a power interruption?

The incubator includes power-off memory that automatically preserves temperature and light program settings after a power interruption, eliminating the need for reprogramming. Additional safety features include self-diagnosis and over-temperature self-limiting protection to safeguard samples and the chamber during routine use.

Assessment

The Atomfair Top-Light Incubator, 150 L (AF-LE-E-GZXT-0150-150T) is a programmable illuminated chamber offering 150 L capacity, 5–60 °C temperature control with ±1 °C uniformity, and 0–10,000 lux top lighting in 6 steps. Its mirror-finish stainless-steel interior, glass inner door, and LCD controller support routine plant growth, tissue culture, and microbial preservation applications, though ambient temperature must be kept at or below 26 °C when set temperature is 10 °C or lower.

Positive

Programmable temperature and light control: The LCD microcomputer controller supports programmable temperature and light settings with a timer range of 0–9999 min, enabling repeatable photoperiod experiments and illuminated incubation workflows without manual intervention.
Corrosion-resistant stainless-steel chamber: The mirror-finish stainless-steel inner chamber and tempered-glass inner door facilitate routine cleaning and visual inspection while providing corrosion resistance for long-term laboratory use.

Trade-offs

Ambient temperature constraint at low setpoints: When the set temperature is 10 °C or below, the ambient temperature must not exceed 26 °C, which may require additional climate control in warm laboratory environments.
Top-light configuration limits illumination uniformity: The top-light layout with 2 faces and 6 intensity levels provides up to 10,000 lux, but side-lighting or multi-angle illumination is not available, restricting uniform light distribution for certain tall or dense sample arrangements.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).