|
Programmable LCD Light Incubator, 800 L
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
This incubator requires a stable ambient temperature between 5°C and 30°C and a dedicated 220 V, 50 Hz power supply rated at 2800 W. Continuous operation beyond 180 hours is recommended only under proper installation conditions with adequate ventilation and maintenance access.
- Temperature Regulation: Maintain the incubator in no-light mode between 4°C and 50°C or in illuminated mode between 10°C and 50°C with a fluctuation of ±1°C.
- Lighting Configuration: Select illumination intensity from 0 to 30000 lx in six steps and configure partition lighting to match the cultivation depth.
- Over-Temperature Protection: The independent over-temperature alarm halts operation and alerts users when abnormal temperature conditions occur.
- Continuous Operation Requirement: Schedule continuous runs for at least 180 hours under proper installation conditions to ensure stable performance.
- Ambient Temperature Range: Operate the incubator only in an ambient temperature between 5°C and 30°C as specified in the technical specifications.
Follow these steps to position, connect, and configure the incubator for light-controlled incubation. Ensure all safety checks are performed before initiating the first run.
Required Equipment: Lifting equipment
- Unpack the incubator
Unpack the chamber using suitable lifting equipment and keep it upright during transport. - Position the incubator
Measure the installation space to confirm it accommodates the external dimensions of 1475 x 890 x 1780 mm. - Connect to power supply
Connect the incubator to a 220 V, 50 Hz power supply rated at 2800 W. - Set temperature and lighting
Set the desired temperature and lighting parameters using the LCD microcomputer controller menu-based interface. - Program incubation cycles
Use the controller's programmable function to create staged lighting and temperature cycles for the incubation protocol.
Why is the temperature range different in illuminated mode (10–50 °C) versus no-light mode (4–50 °C) on the Atomfair AF-MBP0800 / MGC-850BP?
The illuminated mode cannot maintain the same low-end temperature as no-light mode because the lighting system adds heat inside the chamber. The manufacturer specifies no-light mode at 4–50 °C and illuminated mode at 10–50 °C, so experiments requiring low temperature and high light must be planned within the illuminated-mode limit.
Can the Atomfair AF-MBP0800 / MGC-850BP light incubator support CO2-dependent or humidified applications?
No active humidity control is stated for this configuration, so it should not be treated as a humidified CO2 incubator. CO2 support is available only through optional accessories—a CO2 inlet and infrared CO2 controller—and the unit is intended for microbial culture, plant cultivation, seed testing, insect rearing, and other light-controlled incubation workflows.
What installation and power infrastructure are required for the Atomfair AF-MBP0800 / MGC-850BP 800 L light incubator?
Install the unit in a +5 to 30 °C working environment with space for its external dimensions of 1475 x 890 x 1780 mm and a dedicated AC 220 V, 50 Hz supply rated for the stated 2800 W input. Keep air inlets, test ports, shelving, drain areas, doors, and controller surfaces accessible for cleaning and maintenance, and keep the packed chamber upright with suitable lifting equipment during unloading and positioning.
The Atomfair AF-MBP0800 (MGC-850BP) is an 800 L programmable light incubator with 304 stainless-steel interior, fluorine-free cooling, and LCD control, supporting light-controlled incubation from 4 to 50°C with up to 30000 lx six-step adjustable illumination, but lacks built-in humidity control and requires careful installation for long-term continuous operation.
Positive
- 304 stainless-steel interior with rounded corners: The chamber interior is constructed from 304 stainless steel with rounded corners and removable shelving, improving cleaning efficiency and sample layout flexibility in long-duration laboratory use.
- Fluorine-free cooling with imported compressor: The fluorine-free cooling design uses an imported compressor and circulation-fan assembly, supporting efficient chamber running and stable low-temperature performance during repeated use.
Trade-offs
- No active humidity control: The base configuration does not include active humidity control, limiting its use for applications requiring precise humidity regulation.
- Continuous operation guidance: The manufacturer recommends continuous operation schedules of not less than 180 hours under proper installation conditions, which may impose operational planning constraints.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
