|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 160 × 160 × 5 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This document defines handling, compatibility, and processing constraints for the sintered porous titanium foam sheet. The sheet must be protected from crushing and contamination, and process conditions and cleaning methods must be verified before use.
- Mechanical protection: Protect the porous surface from crushing and contamination during handling and installation.
- Process compatibility review: Review media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation.
- Service temperature limit: Keep the sheet within the stated maximum service temperature during operation.
- Cleaning method selection: Select backflushing, steam, ultrasonic, or chemically compatible cleaning according to the process medium and operating procedure.
- Fabrication integration: The metallic construction supports cutting, welding, and basic machining for assembly integration.
This procedure describes pre-installation inspection, compatibility confirmation, and cleaning of a sintered porous titanium foam sheet. The sheet should be handled carefully, and cleaning must be matched to the process medium and operating procedure.
Required Equipment: Backflushing system, Steam cleaning system, Ultrasonic cleaner, Chemical cleaning system
- Inspect the sheet
Inspect the sheet for visible surface contamination or crushing before installation. - Protect the porous surface
Protect the porous surface from crushing and contamination during handling, storage, and installation. - Confirm process compatibility
Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation. - Select a cleaning method
Select a cleaning method that matches the process medium and operating procedure.
How does the 30 PPI pore density relate to the 100 µm filtration rating in this sintered titanium foam sheet?
The 30 PPI (pores per inch) describes the cellular structure's density, while the 100 µm rating specifies the filtration precision. They are independent parameters; the sheet combines both characteristics. The 30 PPI structure yields approximately 0.85 mm cell spacing and 35–45% porosity, while the 100 µm rating ensures that particles larger than 100 µm are retained.
What is the maximum service temperature for this 100 µm porous titanium sheet, and are there any pressure constraints?
The recommended service temperature is ≤300°C. The product description does not specify a maximum operating pressure; it advises reviewing operating pressure, target flow, and media compatibility before installation. The metallic titanium structure supports cutting, welding, and basic machining for assembly integration.
What cleaning methods are recommended for this sintered titanium foam sheet to maintain its filtration performance?
Recommended cleaning methods include backflushing, steam cleaning, ultrasonic cleaning, and compatible chemical procedures. The porous surface should be protected from crushing and contamination. The sheet's metallic construction allows repeated cleaning and reuse in compatible process conditions.
This 160 × 160 × 5 mm sintered titanium foam sheet pairs a 100 µm filtration rating with a 30 PPI cellular structure and 35–45% porosity, balancing particulate retention with interconnected through-pore flow. It is suited to laboratory filtration and porous-structure research, but operating temperature, media compatibility, and handling precautions must be confirmed before deployment.
Positive
- Interconnected porous flow network: The 35–45% porosity and approximately 0.85 mm cell spacing create interconnected through-pore paths that combine a 100 µm filtration rating with low flow resistance, supporting solid-liquid, gas-solid, and gas-liquid separation.
- Corrosion-resistant cleanable titanium structure: The sintered titanium framework provides corrosion resistance and thermal stability in compatible media, and the metallic construction supports cutting, welding, or basic machining as well as backflushing, steam, ultrasonic, or chemical cleaning for reuse.
Trade-offs
- Service temperature limited to 300°C: The recommended service temperature is ≤300°C, so process streams or installation environments above this range fall outside the stated operating envelope.
- Porous surface requires careful handling: The porous surface must be protected from crushing and contamination, and cleaning method selection — backflushing, steam, ultrasonic, or chemical — must match the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
