Sintered Titanium Foam Sheet 50μm 110 PPI ATOMFAIR®

$178.00

Institutional Procurement & Supply Compliance: As a verified US supplier, Atomfair accepts formal institutional Purchase Orders (POs), contract billing schedules, and custom procurement loops for university and national laboratories, and corporate R&D departments globally.

Research-grade sintered titanium foam sheet, 200 × 200 × 3 mm, with 50 μm filtration, 110 PPI pores, 35–45% porosity and ≤300°C service. Order now.

Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 200 × 200 × 3 mm, 110 PPI, 1 Piece

Research-grade laboratory product

Product Overview

This sintered porous titanium foam sheet combines a 50 µm filtration rating with a 110 PPI cellular structure in a 200 × 200 × 3 mm format. Its interconnected titanium framework supports solid-liquid, gas-solid and gas-liquid separation while preserving open pathways for flow.

Made from titanium or titanium-alloy powder through forming and high-vacuum sintering, the sheet contains interconnected passages with 35–45% porosity and about 0.23 mm cell spacing. Its estimated bulk density is 2.48–2.93 g/cm³. The metallic porous structure offers low flow resistance, corrosion resistance, heat tolerance, cleanability and reuse in compatible process conditions.

Supplied as one 200 × 200 × 3 mm sheet, this product fits laboratory trials and engineered filtration assemblies used in water treatment, chemical and petrochemical processing, pharmaceutical and food clarification, gas purification, catalyst recovery, oil filtration, seawater-treatment pretreatment, porous-electrode development, flow distribution, acoustic damping and thermal-management studies. Media compatibility, operating pressure, temperature, target flow and dimensional tolerance should be reviewed before quotation or installation.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-T110-C0350
Material	Titanium and titanium alloy
Product Form	Sintered porous titanium / porous titanium foam sheet
Manufacturing Process	Powder forming and high-vacuum sintering
Filtration Rating	50 µm
Sheet Size	200 × 200 × 3 mm
Thickness	3 mm
Pore Density	110 PPI
Approximate Cell Spacing	0.23 mm
Porosity	35–45%
Open-Pore / Through-Pore Structure	Interconnected porous flow paths
Bulk Density Estimate	2.48–2.93 g/cm³ (derived from 35–45% porosity and 4.51 g/cm³ dense titanium)
Relative Air Permeability	1 × 10^-3 L/(cm²·min·Pa)
General Filtration Range	0.45–100 µm
General Pore-Size Range	2.5–160 µm
Air Permeability Range	1.5–800 m³/(h·m²·kPa)
Recommended Service Temperature	≤300°C
Package Quantity	1 piece

Performance Features

50 µm filtration precision paired with a 110 PPI porous-cell structure.
200 × 200 × 3 mm sheet supplied as one piece.
Cell spacing is approximately 0.23 mm for the 110 PPI structure.
A 35–45% porosity range leaves interconnected paths for liquids and gases.
Uniform pore distribution supports stable separation and controlled filtration.
Titanium-based porous structure provides corrosion resistance and thermal stability in compatible media.
Metallic construction can support cutting, welding and basic machining for assembly integration.
Cleaning options include backflushing, steam, ultrasonic and compatible chemical procedures.

Application Scope

This 50 µm, 110 PPI titanium sheet can be evaluated in porous-metal filtration and separation workflows that fit a 200 × 200 × 3 mm envelope. Relevant fields include pharmaceutical and chemical process filtration, water-treatment prefiltration, food and beverage clarification, oil and solvent filtration, gas and steam purification, catalyst recovery, desalination pretreatment, porous electrodes, flow distribution, acoustic control, thermal transfer and laboratory materials research.

PROCUREMENT CHECK: Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature and media compatibility before quotation.

CONFIGURATION NOTE: PPI describes the cellular structure, while the micrometre value describes filtration precision. Review both values together when matching the sheet to an assembly.

HANDLING & CLEANING: Protect the porous surface from crushing and contamination. Choose backflushing, steam, ultrasonic or chemical cleaning according to the process medium and operating procedure.

RFQ NOTE: Custom dimensions are available upon consultation. Include the required length, width, thickness, PPI, filtration rating and quantity when requesting dimensional review.

LABORATORY PROCUREMENT SUPPORT

For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.

E-MAIL: inquiry@atomfair.com

Manufacturer: Atomfair LLC

Brand: ATOMFAIR®

This document outlines the technical constraints for the 50 µm filtration rating, 110 PPI titanium foam sheet. Adherence to these limits ensures safe operation and prevents material degradation.

Temperature Limit: Do not exceed 300°C service temperature to avoid structural degradation.
Surface Protection: Protect the porous surface from crushing or contamination to maintain filtration integrity.
Cleaning Methods: Use backflushing, steam, ultrasonic, or compatible chemical cleaning procedures as appropriate for the process medium.
Machining Compatibility: The sheet can be cut, welded, or machined, but must be handled to avoid pore collapse.
Operational Review: Confirm media compatibility, operating pressure, temperature, flow, and dimensional tolerance before installation.

FAQ

How does the 110 PPI pore density relate to the 50 µm filtration rating in this sintered titanium foam sheet?

The 110 PPI describes the cellular structure (pores per inch), while the 50 µm value specifies the filtration precision. The interconnected porous framework with 35–45% porosity and approximately 0.23 mm cell spacing supports the 50 µm retention while maintaining open flow paths. Both parameters should be reviewed together when matching the sheet to an assembly.

Can this sintered titanium foam sheet be welded or machined for integration into existing assemblies?

Yes, the metallic construction supports cutting, welding, and basic machining for assembly integration. However, the porous surface must be protected from contamination and crushing during any fabrication process. Confirm dimensional tolerance and operating conditions before installation.

What cleaning methods are recommended for this 50 µm sintered titanium porous foam sheet?

Compatible cleaning methods include backflushing, steam, ultrasonic, and chemical cleaning procedures, depending on the process medium and operating procedure. The porous structure is reusable and cleanable, but care must be taken to avoid crushing or contaminating the porous surface.

Assessment

This 200 × 200 × 3 mm sintered titanium foam sheet combines a 50 µm filtration rating with a 110 PPI cellular structure, 35–45% porosity, and approximately 0.23 mm cell spacing, making it suitable for liquid/gas filtration, catalyst recovery, and flow-distribution studies. Its 300°C service ceiling and crush-sensitive porous surface require controlled handling and verification of the process envelope before installation.

Positive

Interconnected porous titanium structure: The 110 PPI foam sheet has 35–45% porosity with interconnected flow paths and about 0.23 mm cell spacing, enabling low-resistance solid-liquid, gas-solid, and gas-liquid separation in a 200 × 200 × 3 mm footprint.
Corrosion-resistant and cleanable metal media: The titanium-based construction offers corrosion resistance and thermal stability in compatible media, and the sheet can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures for reuse.

Trade-offs

Service temperature limited to 300°C: The recommended service temperature is ≤300°C, so higher-temperature process streams require a media compatibility and operating-envelope review before installation.
Porous surface is crush- and contamination-sensitive: The porous surface must be protected from crushing and contamination; cleaning method must be matched to the process medium and procedure to avoid damaging the structure.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).