|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 120 × 120 × 20 mm, 40 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered titanium foam sheet requires protection from mechanical crushing and contamination during handling and storage. Operational constraints include a maximum recommended service temperature of 300°C and compatibility verification with process media, pressure, and flow conditions before use.
- Mechanical Processing: Cutting, welding, and basic machining can be performed for assembly integration but must avoid damaging the porous structure.
- Cleaning Procedures: Clean the sheet using backflushing, steam, ultrasonic, or compatible chemical methods according to the process medium and operating procedure.
- Temperature Limit: The recommended service temperature must not exceed 300°C to maintain structural integrity.
- Configuration Review: Both the PPI cellular structure rating and the micron filtration rating must be reviewed together when matching the sheet to an assembly.
- Custom Dimensions: Custom dimensions require consultation with the manufacturer to confirm dimensional tolerances and performance.
What is the significance of the 40 PPI pore density and 30 µm filtration rating in this sintered titanium foam sheet?
The 40 PPI (pores per inch) and 30 µm filtration rating describe distinct characteristics: PPI defines the cellular structure with approximately 0.64 mm cell spacing, while the micrometre value indicates the particle retention size. Both values must be reviewed together to match the sheet to a specific filtration or flow application, as the porous network supports solid-liquid, gas-solid, and gas-liquid separation with a porosity of 35–45% and a general filtration range of 0.45–100 µm.
What are the maximum service temperature and media compatibility considerations for this porous titanium sheet?
The recommended service temperature is ≤300°C. Media compatibility must be evaluated on a case-by-case basis; the titanium construction provides corrosion resistance in compatible media, but operating pressure, temperature, target flow, and dimensional tolerance should be reviewed before quotation or installation. The sheet is suitable for water treatment, chemical processing, pharmaceutical filtration, and similar applications where media compatibility is confirmed.
How should this sintered titanium foam sheet be handled, cleaned, and integrated into an assembly?
The porous surface must be protected from crushing and contamination. Cleaning options include backflushing, steam, ultrasonic, or chemical procedures depending on the process medium. The metallic construction supports cutting, welding, and basic machining for assembly integration, but care should be taken to avoid damaging the interconnected porous structure.
The 120 × 120 × 20 mm sintered titanium foam sheet integrates a 30 µm filtration rating with a 40 PPI cellular architecture, 35–45% porosity, and approximately 0.64 mm cell spacing. Its metallic porous matrix supports cutting, welding, and basic machining, but service temperature is limited to ≤300°C and the porous surface must be protected from crushing and contamination during handling.
Positive
- Integrated 30 µm rating and 40 PPI structure: A 30 µm filtration rating is paired with a 40 PPI cellular structure and approximate 0.64 mm cell spacing, providing interconnected open pathways suited to solid-liquid, gas-solid, and gas-liquid separation.
- Corrosion-resistant, cleanable titanium matrix: The titanium-based sintered structure offers corrosion resistance, heat tolerance, cleanability, and reuse in compatible media; its metallic construction also permits cutting, welding, and basic machining for assembly integration.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, and media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before quotation or installation.
- Porous surface requires protective handling: The porous surface must be protected from crushing and contamination, and cleaning via backflushing, steam, ultrasonic, or compatible chemical methods must be selected according to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
