|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 200 × 200 × 2 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This porous titanium sheet is specified for service temperatures up to 300°C and requires media compatibility review before installation. The porous surface must be protected from crushing and contamination during handling, storage, and cleaning.
- Media compatibility verification: Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility against the process stream before installing the sheet.
- Thermal service limit: Maintain process temperatures at or below the recommended service temperature of 300°C to avoid structural degradation.
- Porous surface protection: Protect the porous surface from crushing and contamination during handling, installation, and storage.
- Cleaning method selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
This procedure covers compatibility verification, safe handling, and cleaning of the porous titanium sheet. Confirm the configuration and protect the porous structure before use.
Required Equipment: Backflushing apparatus, Steam cleaning equipment, Ultrasonic cleaning bath
- Review configuration
Review both the PPI cellular-structure value and the micrometre filtration rating together when matching the sheet to an assembly. - Confirm compatibility
Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before quotation or installation. - Inspect the sheet
Inspect the porous sheet for visible crushing, contamination, or dimensional damage before installation. - Handle the sheet safely
Handle the sheet by its edges or with evenly distributed support to avoid crushing the porous surface. - Integrate into the assembly
Integrate the sheet into the assembly using cutting, welding, or basic machining only as required for the fit. - Clean the porous structure
Clean the sheet using backflushing, steam, ultrasonic, or compatible chemical procedures selected for the process medium.
How do the 30 µm filtration rating and 20 PPI pore density relate, and how should both be evaluated for this sintered titanium sheet?
The 30 µm value describes filtration precision, while 20 PPI describes the porous-cell structure, so they are separate parameters that must be reviewed together. This sheet's interconnected 20 PPI network has approximately 1.27 mm cell spacing and 35–45% porosity, providing open flow paths, while the 30 µm rating defines particle retention. Match both values to the assembly's target flow, operating pressure, and separation requirements before installation.
Can this 200 × 200 × 2 mm sintered titanium foam sheet be cut, welded, or machined for integration into a custom filtration assembly?
Yes, the metallic porous construction can support cutting, welding, and basic machining for assembly integration. The sheet is supplied as one 200 × 200 × 2 mm piece with interconnected through-pore flow paths, so any fabrication step should protect the porous surface from crushing and contamination. Confirm dimensional tolerance, media compatibility, and operating conditions before quotation or installation.
What handling, cleaning, and service conditions are recommended for this 30 µm porous titanium sheet?
Protect the porous surface from crushing and contamination during handling, and choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure. The recommended service temperature is ≤300°C. The titanium and titanium-alloy structure provides corrosion resistance and thermal stability in compatible media, so verify media compatibility, operating pressure, and temperature before use.
Sintered porous titanium foam sheet with 30 µm filtration rating, 20 PPI cellular structure, 35–45% porosity, and approximately 1.27 mm cell spacing in a 200 × 200 × 2 mm format. Deployment suitability depends on media compatibility, operating pressure, temperature, and flow review, with a recommended service temperature limit of ≤300°C.
Positive
- Interconnected 35–45% porosity with low flow resistance: Powder forming and high-vacuum sintering create interconnected through-pore paths that support solid-liquid, gas-solid, and gas-liquid separation at a 30 µm filtration rating while preserving open pathways for flow.
- Corrosion-resistant, heat-tolerant, reusable metal structure: The titanium-based porous structure provides corrosion resistance and thermal stability in compatible media. Backflushing, steam, ultrasonic, or compatible chemical cleaning methods support repeated use.
Trade-offs
- Maximum service temperature 300°C: Recommended service temperature is limited to ≤300°C. Higher-temperature operation requires explicit engineering review of media compatibility and system operating limits.
- Porous surface requires crush and contamination protection: Handling guidance explicitly warns to protect the porous surface from crushing and contamination. The cleaning method must also be matched to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
