|
Sintered Titanium and Porous Titanium Foam Sheet, 20 µm Filtration Rating, 120 × 120 × 15 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sheet must be protected from surface crushing and contamination to preserve its porous structure and filtration integrity. Media compatibility, operating pressure, temperature, and target flow must be reviewed before installation to avoid corrosion or structural failure.
- Temperature Limit: Recommended service temperature does not exceed 300°C to maintain mechanical and corrosion resistance.
- Cleaning Compatibility: Cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures selected according to the process medium.
- Machining Constraint: The metallic structure supports cutting, welding, and basic machining but must be performed without collapsing the porous network.
Inspect the sheet for surface damage and verify dimensional fit before installation. Clean the sheet using a method compatible with the process medium to remove any debris prior to use.
Required Equipment: Ultrasonic cleaner or backflushing apparatus, Clean, lint-free gloves
- Inspect the sheet
Inspect the porous surface for any visible crushing, deformation, or contamination before handling. - Clean the sheet
Clean the sheet using backflushing, steam, ultrasonic, or a compatible chemical method to remove any residual particles. - Verify media compatibility
Confirm that the process medium, operating pressure, and temperature are within the sheet's rated limits before installation. - Install the sheet
Install the sheet into the filtration assembly, ensuring the 120 × 120 × 15 mm envelope fits without forcing or deforming the porous structure.
What is the difference between the 20 µm filtration rating and the 20 PPI rating on this Atomfair sintered titanium sheet?
The 20 µm value specifies filtration precision, while 20 PPI describes the cellular pore structure; both must be reviewed together when matching the sheet to an assembly. This sheet has a 20 µm filtration rating, approximately 1.27 mm cell spacing, and 35–45% porosity with interconnected flow paths. The micrometre rating defines particle retention, while the PPI rating defines the cellular architecture.
What operating and integration constraints apply to this porous titanium foam sheet?
Recommended service temperature is ≤300°C, and media compatibility, operating pressure, target flow, and dimensional tolerance should be reviewed before installation. The sheet is made of titanium or titanium alloy by powder forming and high-vacuum sintering, and its metallic structure supports cutting, welding, and basic machining for assembly integration. Confirm material grade and process conditions with the technical sales team before quotation.
How should this sintered porous titanium sheet be cleaned and handled?
Clean the sheet by backflushing, steam, ultrasonic, or compatible chemical procedures depending on the process medium and operating procedure. Protect the porous surface from crushing and contamination during handling and cleaning. The titanium-based porous structure is designed for cleanability and reuse in compatible process conditions.
This 120 × 120 × 15 mm sintered porous titanium foam sheet, rated at 20 µm filtration with a 20 PPI cellular structure and 35–45% porosity, is evaluated for gas-solid and gas-liquid separation, catalyst recovery, and porous-electrode research, with the key operating caveat that service temperature is limited to 300°C and media compatibility must be confirmed before installation.
Positive
- Interconnected porous flow network: The 35–45% porosity with interconnected through-pore paths and approximately 1.27 mm cell spacing supports solid-liquid, gas-solid, and gas-liquid separation while maintaining low flow resistance and a relative air permeability of 1 × 10^-4 L/(cm²·min·Pa).
- Cleanable corrosion-resistant titanium structure: The sintered titanium or titanium-alloy framework provides corrosion resistance and thermal stability up to the 300°C recommended service temperature, and can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures for reuse in suitable process conditions.
Trade-offs
- Limited to 300°C service temperature: Recommended service temperature is ≤300°C, so this sheet is not suitable for higher-temperature filtration or thermal-management applications beyond that limit.
- Porous surface requires crush and contamination protection: Handling guidance explicitly requires protecting the porous surface from crushing and contamination, and media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
