|
Sintered Titanium and Porous Titanium Foam Sheet, 20 µm Filtration Rating, 200 × 200 × 5 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The porous titanium surface is susceptible to crushing and contamination, requiring protection during handling and storage. Recommended service temperature does not exceed 300°C, and media compatibility must be verified before installation.
- Surface Protection: Protect the porous surface from crushing and contamination to maintain filtration integrity.
- Temperature Limit: Do not exceed the recommended service temperature of 300°C to avoid structural degradation.
- Media Compatibility: Confirm media compatibility with the titanium alloy matrix before installation to prevent corrosion or failure.
This procedure outlines safe handling and cleaning steps for a 200 × 200 × 5 mm sintered titanium foam sheet. Proper methods prevent surface damage and maintain filtration performance.
Required Equipment: Backflushing system, Ultrasonic cleaner, Steam cleaning equipment
- Inspect the sheet
Inspect the sheet for visible damage or contamination before handling. - Select cleaning method
Select backflushing, steam, ultrasonic, or compatible chemical cleaning based on the process medium and operating procedure. - Perform cleaning
Apply the chosen cleaning method without exceeding the recommended service temperature of 300°C. - Rinse and dry
Rinse the sheet with deionized water and allow it to air dry in a clean environment. - Store properly
Store the sheet in a dry, protected area away from crushing forces and contaminants.
For a given filtration rating of 20 µm, what is the practical significance of the 110 PPI pore density and how does the interplay between filtration rating (µm) and pore density (PPI) affect flow rate and particle retention in this titanium foam sheet?
The 20 µm filtration rating defines the particle size cut-off, while the 110 PPI (pores per inch) indicates the cellular structure's density. The combination yields a cell spacing of approximately 0.23 mm and a porosity of 35–45%, which together create interconnected flow paths with low flow resistance. The relative air permeability is 1×10⁻⁴ L/(cm²·min·Pa). Reviewing both values together ensures the sheet matches the intended separation efficiency and throughput requirements.
What are the recommended operating temperature limits and chemical compatibility considerations for this sintered titanium foam sheet in filtration applications?
The recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance in compatible media, but media compatibility, operating pressure, and temperature should be reviewed before installation. The product is suitable for water treatment, chemical processing, pharmaceutical, food, gas purification, and other applications, but specific chemical resistance depends on the process medium.
What cleaning and handling procedures are recommended for this 20 µm porous titanium foam sheet to maintain filtration performance and avoid damage?
The porous surface must be protected from crushing and contamination. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures, selected according to the process medium and operating procedure. The metallic construction supports cutting, welding, and basic machining for assembly integration.
The AF-AF-F-T110-T050-C020 sintered titanium foam sheet delivers 20 µm filtration in a 200 × 200 × 5 mm format with a 110 PPI interconnected porous structure, making it suitable for laboratory filtration, porous-electrode, flow-distribution, and thermal-management studies. Its 35–45% open porosity and titanium-based corrosion resistance support reuse, but service is limited to ≤300°C and the porous surface must be protected from crushing and contamination during handling.
Positive
- 20 µm rating with interconnected 110 PPI porosity: Combines 20 µm filtration precision with a 110 PPI cellular structure and 35–45% interconnected open porosity, supporting solid-liquid, gas-solid, and gas-liquid separation with low flow resistance.
- Corrosion-resistant and cleanable sintered titanium: The high-vacuum sintered titanium structure provides corrosion resistance and heat tolerance up to 300°C, and can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures.
Trade-offs
- Service temperature limited to 300°C: Maximum recommended service temperature is ≤300°C, so higher-temperature process streams require material-grade and operating-condition review before installation.
- Porous surface requires crush and contamination protection: The porous sheet must be protected from crushing and contamination during handling and cleaning, and the cleaning method must be matched to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
