|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 200 × 200 × 1.5 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered titanium foam sheet must be operated within its recommended service temperature of ≤300°C to maintain structural integrity. The porous surface requires protection from crushing and contamination, and cleaning should be performed using backflushing, steam, ultrasonic, or compatible chemical procedures.
- Temperature Limit: Operating temperature must not exceed 300°C.
- Mechanical Protection: The porous surface must be protected from mechanical crushing and contamination during handling.
- Pre-Installation Review: Media compatibility, operating pressure, target flow, and dimensional tolerance must be reviewed before installation.
- Cleaning Methods: Cleaning methods include backflushing, steam, ultrasonic, or compatible chemical procedures.
- Machining Caution: Cutting, welding, or machining of the sheet is possible but may affect structural integrity.
How does the 10 µm filtration rating relate to the 110 PPI structure of this sintered titanium foam sheet?
The 10 µm filtration rating specifies the particle size retained, while the 110 PPI (pores per inch) describes the cellular structure density. These are complementary parameters: the 110 PPI structure provides approximately 0.23 mm cell spacing and 35–45% porosity, enabling the 10 µm filtration precision through interconnected pathways. The product's general filtration range is 0.45–100 µm, so 10 µm is a specific point within that range.
What are the service temperature limits and material compatibility considerations for this porous titanium foam sheet?
The recommended service temperature is ≤300°C. The titanium-based porous structure offers corrosion resistance in compatible media, but media compatibility, operating pressure, and temperature must be reviewed before installation. The product is suitable for applications in water treatment, chemical processing, pharmaceuticals, and gas purification, but each application requires verification of chemical compatibility with the process medium.
What cleaning methods are recommended for this sintered titanium foam sheet without damaging the porous structure?
Recommended cleaning methods include backflushing, steam cleaning, ultrasonic cleaning, and compatible chemical cleaning procedures. The porous surface must be protected from crushing and contamination during handling. The metallic construction supports cutting, welding, and basic machining for assembly integration, but care must be taken to preserve the interconnected porous flow paths.
This 10 µm, 110 PPI sintered titanium foam sheet (200 × 200 × 1.5 mm) offers a 35–45% interconnected porous network with an estimated bulk density of 2.48–2.93 g/cm³, balancing filtration precision with low flow resistance for solid-liquid, gas-solid, and gas-liquid separation. Its titanium-based construction provides corrosion resistance and thermal stability up to 300°C, but the 1.5 mm thickness and 200 × 200 mm footprint impose dimensional constraints, and the porous surface requires careful handling to prevent crushing or contamination.
Positive
- Interconnected porous structure: The 35–45% porosity with approximately 0.23 mm cell spacing creates interconnected flow paths, enabling stable separation and controlled filtration across liquid and gas media while maintaining low flow resistance.
- Corrosion and thermal resistance: The sintered titanium framework provides corrosion resistance and heat tolerance up to 300°C, supporting use in chemical, pharmaceutical, and high-temperature filtration applications where polymeric media would degrade.
Trade-offs
- Dimensional and thickness constraints: The fixed 200 × 200 × 1.5 mm sheet format limits integration into assemblies requiring larger or thicker media; custom dimensions require consultation and may not preserve the same filtration rating or PPI.
- Surface vulnerability to damage: The porous surface must be protected from crushing and contamination during handling and cleaning; improper backflushing, steam, ultrasonic, or chemical cleaning can compromise pore integrity and filtration performance.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
