|
Terbium Oxide (Tb4O7) Evaporation Material, Pieces, 99.9%, 8-110 nm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This material requires specific deposition hardware and source compatibility for vacuum thin-film evaporation. Confirm deposition source geometry, boat or liner material, and process parameters before use.
- Deposition Source Compatibility: Evaporation source hardware must be matched to the material behavior, melting point, and film requirements.
- Evaporation Method Preference: E-beam evaporation is the preferred method; thermal evaporation requires RFQ and compatible boat materials.
- Hardware Compatibility: Compatible with E-beam hearth using graphite, Al2O3, or BN liners, or W/Mo/Ta boats.
- Particle Size Constraint: The 8-110 nm piece size must be suitable for the intended source loading and evaporation review.
- Procurement Verification: Confirm model, purity, form, size range, pack size, and deposition-source compatibility before quotation.
What is the significance of the 8–110 nm particle size range for Tb4O7 evaporation material?
The pieces are sized 8–110 nm, indicating a fine granular form that facilitates consistent loading into evaporation sources and uniform deposition rates. This size range is particularly suited for e-beam evaporation, where small pieces are preferred for controlled melting and film uniformity.
Can Terbium Oxide (Tb4O7) pieces be used in both e-beam and thermal evaporation systems?
Yes, the product is optimized for e-beam evaporation, but thermal evaporation is possible by RFQ. The source specifies that e-beam evaporation is preferred, and thermal evaporation can be accommodated using an e-beam hearth with graphite/Al2O3/BN liner or a W/Mo/Ta boat, as noted in the hardware compatibility table.
What documentation is available for safe handling and storage of Tb4O7 evaporation material?
The product description indicates that certificate, safety data sheet, shipment condition, and export requirements can be reviewed against laboratory use requirements. Buyers should request these documents from the supplier to ensure proper handling, storage, and compliance with laboratory safety protocols.
Terbium Oxide (Tb4O7) evaporation material in pieces (8–110 nm, 99.9% purity) is evaluated for e-beam evaporation deposition of thin films, with a defined particle size range that supports consistent source loading and evaporation behavior, though thermal evaporation requires RFQ and specific liner or boat materials.
Positive
- Defined particle size range: The 8–110 nm piece size is specified to support consistent source loading and controlled evaporation behavior in e-beam deposition, reducing variability in film thickness uniformity.
- High purity for standard applications: The 99.9% purity level enables direct comparison with standard-grade materials and supports routine thin-film research without requiring RFQ-controlled grades for most applications.
Trade-offs
- Thermal evaporation requires RFQ: Thermal evaporation is not directly supported; users must request a quotation (RFQ) and confirm compatibility with specific boat or liner materials (graphite, Al2O3, BN, W, Mo, Ta), adding procurement lead time.
- Deposition hardware must be verified: The material is optimized for e-beam evaporation, but buyers must confirm deposition source geometry and liner/boat compatibility before ordering to avoid process mismatches.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
