|
Nimendium (Ni3%Mn) Evaporation Material, Pieces, 99.9%, 1-3 mm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This evaporation material requires confirmation of deposition-source compatibility and process route before use. The material's melting point and density must be matched to the evaporation hardware and intended film properties.
- Deposition-Source Compatibility: Confirm crucible or boat material compatibility with Nimendium at its melting point of 1425°C to avoid contamination or damage.
- Process Route Matching: Select thermal or e-beam evaporation method based on the material's behavior and the required film characteristics.
- Piece Size Verification: Verify that the 1-3 mm piece size fits the source loading geometry to ensure consistent evaporation.
- Purity Validation: Validate that the 99.9% purity level meets the contamination tolerance of the deposition process.
What is the melting point of Nimendium (Ni3%Mn) and how does it influence the choice between thermal resistive and e-beam evaporation?
The melting point of Nimendium (Ni3%Mn) is 1,425 °C with a density of 8.8 g/cm³, as stated in the product specifications. This high melting point makes the material suitable for both thermal/resistive and e-beam evaporation, but the specific method and compatible crucible/boat hardware must be confirmed via RFQ with the supplier to ensure proper deposition parameters and avoid source damage.
What crucible or boat materials are compatible with Nimendium (Ni3%Mn) evaporation at 1,425 °C?
The product description lists the evaporation source as 'Compatible crucible/boat by RFQ,' meaning that specific crucible or boat materials are not pre-specified and must be determined through a request for quotation. For a material with a melting point of 1,425 °C, common options such as alumina, boron nitride, or tungsten may be considered, but compatibility should be confirmed with the supplier based on the deposition method and film requirements.
How does the 1–3 mm piece size of Nimendium (Ni3%Mn) evaporation material affect source loading and deposition consistency?
The Nimendium (Ni3%Mn) pieces are supplied in a 1–3 mm size range, which is specified to facilitate consistent source loading and evaporation review. This size distribution helps minimize spitting during thermal or e-beam evaporation and supports uniform deposition rates. Buyers are advised to confirm that the piece size is compatible with their specific source geometry and crucible dimensions before ordering.
Nimendium (Ni3%Mn) evaporation material, 99.9% purity, offered as 1–3 mm pieces with melting point 1,425°C and density 8.8 g/cm³, is designed for thermal or e-beam vacuum deposition, though crucible/boat compatibility must be confirmed via RFQ.
Positive
- Defined composition and purity grade: Material identity (Ni3%Mn) and 99.9% purity are explicitly specified, enabling direct comparison with standard and high-purity grades for process matching.
- Controlled piece form and size range: Supplied as pieces with 1–3 mm sizing, the physical form supports consistent source loading and evaporation behavior in vacuum deposition systems.
Trade-offs
- Crucible/boat compatibility requires RFQ: Deposition source hardware compatibility is not pre-configured; buyers must submit an RFQ to confirm suitable crucible or boat for the evaporation method.
- High melting point demands compatible hardware: With a melting point of 1,425°C, the material requires evaporation source infrastructure capable of reaching and sustaining that temperature, adding to system matching requirements.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
