|
Nickel Oxide (NiO) Evaporation Material, Pellets, 99.95%, 3 µm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This material requires an e-beam evaporation system with a hearth lined with graphite, alumina, or boron nitride, or a tungsten/molybdenum/tantalum boat for deposition. Thermal evaporation is only available by request for quotation due to the material's high melting point of 1984°C and density of 6.67 g/cm³.
- Source Compatibility: The evaporation source must be an e-beam hearth with a liner of graphite, Al2O3, or BN, or a boat made of W, Mo, or Ta.
- Melting Point Constraint: The material's melting point of 1984°C requires e-beam evaporation as the preferred method to achieve sufficient vapor pressure.
- Density and Z-Ratio: A density of 6.67 g/cm³ and a Z-ratio of 1.00 indicate no tooling factor correction is needed for quartz crystal microbalance monitoring.
- Evaporation Method: E-beam evaporation is preferred; thermal evaporation is possible only via RFQ and requires assessment of source material compatibility.
- Procurement Verification: Confirm model, purity, form, size range, pack size, and deposition-source compatibility before quotation to ensure process matching.
What is the significance of the Z-ratio of 1.00 for Nickel Oxide (NiO) evaporation material in quartz crystal microbalance (QCM) monitoring?
A Z-ratio of 1.00 indicates that the acoustic impedance of NiO matches that of the quartz crystal, enabling straightforward rate monitoring without correction factors. This simplifies process control during e-beam evaporation, as stated in the product specifications.
Can NiO pellets be used in thermal evaporation, and what hardware modifications are required?
Thermal evaporation of NiO is possible by RFQ (request for quotation) but requires an e-beam hearth with a graphite, Al2O3, or BN liner, or a W/Mo/Ta boat. Standard thermal boats may not be compatible due to the high melting point of 1,984°C, as specified in the product description.
What documentation and safety considerations should be reviewed before handling NiO evaporation material?
The product description advises reviewing the certificate of analysis, safety data sheet, shipment conditions, and export requirements. The material is 99.95% pure NiO pellets, and standard laboratory handling for fine powders and high-temperature evaporation materials applies.
Nickel Oxide (NiO) pellets at 99.95% purity and 3 μm particle size are specified for E-beam evaporation with defined source liner compatibility, but the high melting point (1,984°C) and required pre-quotation confirmation of source geometry and documentation impose operational constraints for lab deployment.
Positive
- High purity and defined particle size: 99.95% purity and 3 µm pellet form enable consistent evaporation behavior and predictable film stoichiometry in vacuum deposition processes.
- Explicit source hardware compatibility: Evaporation source is specified for E-beam hearth with graphite/Al2O3/BN liner or W/Mo/Ta boat, with Al2O3 liner option, reducing trial-and-error in source selection.
Trade-offs
- High melting point requires robust hardware: Melting point of 1,984°C demands high-temperature evaporation source and careful thermal management to avoid material decomposition or source damage.
- Pre-purchase confirmation required for multiple parameters: Buyers must confirm deposition source geometry, certificate requirements, and shipment conditions before quotation, adding procurement steps for non-standard orders.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
