|
Nickel Oxide (NiO) Evaporation Material, Pellets, 99.995%, 3 µm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This evaporation material requires specific deposition hardware and procedural verification before use. Compatibility with e-beam hearth liners or thermal boats must be confirmed to avoid contamination or equipment damage.
- Material Purity and Identity: Confirm the material is Nickel Oxide (NiO) with 99.995% purity and pellet form with 3 µm size range.
- Deposition Method Compatibility: E-beam evaporation is the preferred method, but thermal evaporation may be used by request for quotation.
- Evaporation Source Hardware: Use an e-beam hearth with graphite, Al2O3, or BN liner, or a W, Mo, or Ta boat for thermal evaporation.
- Procurement Verification: Verify the model, purity, form, size range, pack size, and deposition-source compatibility before placing the quotation.
- Documentation Requirements: Review the certificate of analysis, safety data sheet, shipment conditions, and export requirements for laboratory use.
Follow these steps to confirm the evaporation material matches your deposition hardware and process requirements. This ensures proper material selection and avoids operational issues.
- Confirm Hardware Compatibility
Confirm that the evaporation source hardware (e-beam hearth or thermal boat) is compatible with the pellet form and 3 µm size range. - Select Liner or Boat Material
Select the liner material (graphite, Al2O3, or BN) or boat material (W, Mo, or Ta) based on the melting point of 1,984°C and chemical compatibility. - Determine Pack Size and Quantity
Determine the required pack size (100g, 500g, or 1kg) and quantity needed for the deposition run. - Request Documentation
Request the certificate of analysis and safety data sheet to verify the 99.995% purity and assess handling requirements. - Place the Quotation Request
Place the quotation request including the model, purity, form, size, and quantity after confirming all specifications.
What is the recommended evaporation method for nickel oxide (NiO) pellets, and what are the compatible liner materials for e-beam evaporation?
E-beam evaporation is preferred; thermal evaporation is available by RFQ. For e-beam, use a hearth with graphite/Al2O3/BN liner. For thermal, use a W/Mo/Ta boat or Al2O3 liner.
How does the Z-ratio of 1.00 for NiO affect film thickness monitoring during deposition?
The Z-ratio of 1.00 indicates that the material's acoustic impedance matches the quartz crystal monitor, simplifying thickness calibration and ensuring accurate film thickness control during deposition.
What are the key material specifications to verify when ordering NiO evaporation pellets, and why is the 3 µm particle size important?
The product specifies 99.995% purity, pellets form, 3 µm particle size, and a melting point of 1,984 °C. The 3 µm size ensures consistent loading and controlled evaporation behavior in the crucible.
Nickel Oxide (NiO) pellets at 99.995% purity and 3 µm size are evaluated for e-beam evaporation deposition, requiring source hardware compatibility checks due to high melting point and specific liner/boat requirements for thermal evaporation.
Positive
- High purity 99.995%: Minimizes contamination in deposited thin films, supporting consistent film properties for research-grade applications.
- Defined pellet form and size: Pellets at 3 µm facilitate controlled source loading and predictable evaporation behavior in vacuum deposition systems.
Trade-offs
- High melting point requirement: Melting point of 1,984°C necessitates high-power e-beam sources or specialized thermal setups, limiting compatibility with standard low-power evaporation hardware.
- Deposition source hardware compatibility: Thermal evaporation requires RFQ and specific liner/boat materials (graphite, Al2O3, BN, W, Mo, Ta); e-beam evaporation is preferred but users must confirm source geometry and liner compatibility before ordering.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
