|
Molybdenum Oxide (MoO3) Evaporation Material, Pellets, 99.95%, 8-75 nm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This molybdenum oxide evaporation material requires specific deposition source hardware and process parameters. Users must verify compatibility with e-beam or thermal evaporation systems and appropriate liner materials.
- Evaporation Method Preference: E-beam evaporation is the preferred method; thermal evaporation is available by RFQ only.
- Source Liner Compatibility: Compatible evaporation source liners include graphite, Al2O3, BN, W, Mo, and Ta.
- Material Properties for Process Control: Melting point of 795°C, density of 4.69 g/cm³, and Z-ratio of 1.00 must be considered for deposition rate control.
- Particle Size Specification: Pellets with particle size range of 8-75 nm are required for consistent source loading and evaporation.
- Procurement Verification: Deposition source geometry and hardware compatibility must be confirmed before ordering.
Why is e-beam evaporation preferred over thermal evaporation for depositing MoO3 pellets from this product?
E-beam evaporation is preferred because MoO3 has a melting point of 795°C and density 4.69 g/cm³, and the pellets (8–75 nm) are designed for e-beam hearths using graphite, Al2O3, or BN liners. Thermal evaporation is possible only by RFQ and requires W, Mo, or Ta boats, which may alter deposition behavior and rate.
What liner or boat materials are compatible with these MoO3 evaporation pellets?
For e-beam evaporation, use a graphite, Al2O3, or BN liner. For thermal evaporation (by RFQ), use a W, Mo, or Ta boat. The product also lists Mo and Al2O3,BN as additional compatible hardware. Always confirm compatibility with your deposition system before ordering.
What is the Z-ratio of MoO3 and why is it important for thin-film deposition control?
The Z-ratio for MoO3 is 1.00, which simplifies quartz crystal microbalance (QCM) thickness monitoring by eliminating the need for correction factors. This value, combined with the specified density of 4.69 g/cm³, allows direct and accurate film thickness calibration during e-beam or thermal evaporation.
Molybdenum Oxide (MoO3) evaporation material in pellet form with 99.95% purity and 8-75 nm particle size, optimized for E-beam evaporation in vacuum thin-film deposition, with multiple pack sizes from 25g to 1kg for laboratory scalability.
Positive
- High purity 99.95% MoO3 pellets: The material is supplied with 99.95% purity, ensuring minimal contamination for thin-film deposition processes requiring high-quality oxide layers.
- Multiple pack sizes for scalability: Available in 25g, 100g, 500g, and 1kg packs, allowing researchers to procure quantities matching experimental or pilot production needs without excess waste.
Trade-offs
- Deposition source compatibility required: The material is optimized for E-beam evaporation; thermal evaporation requires RFQ, and specific hearth liners (graphite/Al2O3/BN) or boats (W/Mo/Ta) must be verified to prevent material interaction or contamination.
- Nanometer particle size handling challenges: The stated pellet size of 8-75 nm is unusually small, potentially complicating handling, loading, and uniform evaporation; buyers should confirm that this size range is accurate and suitable for their source geometry.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
