|
Palladium (Pd) Evaporation Material, Wire, 99.999%, Dia. 0.5 mm
Product Type: Pure Metal Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This palladium wire requires thermal/resistive evaporation using tungsten, molybdenum, or tantalum filament, basket, coil, or boat sources. The material's melting point of 1,554°C and Z-ratio of 0.357 must be considered for process parameter tuning and thickness monitoring.
- Evaporation Source Compatibility: Evaporation source must be compatible with the wire form and diameter of 0.5 mm for proper loading and uniform evaporation.
- Process Temperature Requirement: Process temperature must approach the melting point of 1,554°C to achieve effective vaporization of the palladium wire.
- Thickness Monitoring Parameter: The Z-ratio of 0.357 is required for accurate quartz crystal microbalance thickness monitoring during deposition.
- Deposition Rate Calculation: Density of 12.02 g/cm³ influences deposition rate calculations and must be entered into process control software.
What is the melting point of this palladium wire and how does it affect thermal evaporation process parameters?
The melting point of this palladium wire is 1,554 °C, which is typical for palladium. This high melting point requires a compatible evaporation source capable of reaching that temperature, such as tungsten, molybdenum, or tantalum boats or filaments. The wire form and 0.5 mm diameter facilitate uniform loading and controlled evaporation rates during thermal/resistive deposition.
Which evaporation source materials are compatible with this 0.5 mm palladium wire?
The product is designed for thermal/resistive evaporation using tungsten, molybdenum, or tantalum filament, basket, coil, or boat sources. The wire diameter of 0.5 mm allows for easy loading into these source geometries. Buyers should confirm source geometry compatibility before ordering.
What pack sizes are available for this palladium wire and how do they correlate with typical deposition run requirements?
Available pack sizes are 1g, 5g, 10g, 25g, and 100g. The 1g minimum order quantity allows for small-scale testing, while larger packs support multiple deposition runs. Pricing is tiered: 1g at USD 140, 5g at USD 430, 10g at USD 750, 25g at USD 1350, and 100g at USD 3300. Buyers should estimate required mass based on film thickness, substrate area, and deposition efficiency.
This 99.999% pure palladium wire (0.5 mm diameter) is a well-defined evaporation material for thermal resistive deposition, offering consistent high-purity films. Its compatibility with standard W/Mo/Ta sources and available pack sizes make it suitable for research and development thin-film applications.
Positive
- High-purity 99.999% wire: Palladium wire with 99.999% purity minimizes contamination in thin-film deposition, ensuring consistent film properties for research and device fabrication.
- Compatible with thermal evaporation sources: The 0.5 mm diameter wire is designed for use with W/Mo/Ta filaments, baskets, coils, or boats, simplifying integration into existing vacuum deposition systems.
Trade-offs
- High melting point requires robust source: With a melting point of 1554°C, the evaporation material necessitates high-temperature compatible sources and careful thermal management to avoid source degradation.
- Z-ratio of 0.357 affects rate monitoring: The low Z-ratio relative to common materials may require adjustments to quartz crystal monitor calibration for accurate thickness control during deposition.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
