|
Palladium (Pd) Evaporation Material, Wire, 99.95%, Dia. 1.0 mm
Product Type: Pure Metal Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This palladium wire evaporation material requires specific source compatibility and process parameter control. The material's melting point of 1554°C, density of 12.02 g/cm³, and Z-ratio of 0.357 define the thermal evaporation conditions and thickness monitoring requirements.
- Source Material Compatibility: The evaporation source must be constructed from tungsten, molybdenum, or tantalum and configured as a filament, basket, coil, or boat to avoid contamination and ensure proper heating.
- Thermal Process Parameters: The melting point of 1554°C and density of 12.02 g/cm³ dictate the required source power and evaporation rate for consistent deposition.
- Film Thickness Calibration: The Z-ratio of 0.357 must be entered into the quartz crystal microbalance to accurately monitor the deposited film thickness.
- Purity Verification: The 99.95% purity specification must be verified upon receipt and during handling to avoid contamination that could affect film quality.
- Wire Form and Source Compatibility: The 1.0 mm diameter wire form must be compatible with the source's loading mechanism and coil spacing to ensure even feeding and evaporation.
This procedure outlines the steps to verify product specifications and process compatibility before using the palladium wire in thermal evaporation. Following these steps ensures proper material selection and safe integration into the deposition workflow.
Required Equipment: Thermal evaporation source (W/Mo/Ta filament, basket, coil, or boat)
- Confirm Product Specifications
Confirm the product model, purity, physical form, diameter, pack size, and deposition-source compatibility against your requirements before placing an order. - Review Documentation
Review the certificate of analysis, safety data sheet, shipment conditions, and export restrictions to ensure compliance with your laboratory's protocols. - Match Process Parameters
Match the evaporation source hardware and process route to the material's melting point, density, and Z-ratio to achieve the desired film characteristics. - Submit Quotation Request
Include the required model, purity, form, size range, and quantity when submitting a quotation request to the supplier.
What is the significance of the Z-Ratio of 0.357 for this palladium evaporation material?
The Z-Ratio of 0.357 is a critical parameter for quartz crystal microbalance (QCM) thickness monitoring during thermal evaporation of this palladium wire (99.95% purity). It corrects the acoustic impedance mismatch between palladium and quartz based on the material's density of 12.02 g/cm³ as listed in the specifications. This value must be entered into the deposition controller to ensure accurate film thickness measurement during vacuum thin-film deposition.
Which evaporation source materials are compatible with this palladium wire?
This palladium wire (dia. 1.0 mm) is compatible with thermal/resistive evaporation using tungsten (W), molybdenum (Mo), or tantalum (Ta) filaments, baskets, coils, or boats as stated in the technical specifications. The wire form factor is designed for easy loading into these source geometries; however buyers should confirm their specific deposition source geometry before ordering to ensure proper fit and wetting behavior.
What documentation should be reviewed before handling this palladium evaporation material?
Before handling this palladium wire (99.95% purity), users should review the certificate of analysis (CoA) to verify purity against the stated specification of 99.95%, consult the safety data sheet (SDS) for handling precautions specific to palladium metal in wire form (dia. 1.0 mm), and confirm shipment conditions and export requirements with the supplier to ensure compliance with laboratory safety protocols.
Atomfair Palladium evaporation wire (99.95% purity, 1.0 mm diameter) offers a well-defined physical form for thermal resistive deposition, with flexible pack sizes and explicit compatibility with W/Mo/Ta sources, though pre-order verification of hardware and documentation is required.
Positive
- High-purity wire form for precise deposition: Palladium wire with 99.95% purity and 1.0 mm diameter ensures consistent evaporation behavior and minimal contamination in thin-film applications.
- Broad evaporation source compatibility: Compatible with thermal/resistive evaporation using tungsten, molybdenum, or tantalum filaments, baskets, coils, or boats, offering flexibility in deposition system integration.
Trade-offs
- Pre-order verification required: Buyers must confirm deposition source geometry, pack size, certificate requirements, and shipment conditions before quotation to ensure compatibility.
- Research-grade handling constraints: The material is supplied for laboratory use; proper safety data sheet review, export compliance, and process-matching expertise are necessary for successful deployment.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
