|
Niobium (Nb) Evaporation Material, Wire, 99.95%, Dia. 1.0 mm
Product Type: Pure Metal Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This niobium wire evaporation material requires careful matching to deposition source hardware and method. Compatibility with water-cooled e-beam hearths or W/Ta supports must be confirmed before use.
- Deposition Source Compatibility: Use only with water-cooled e-beam hearths or W/Ta supports by RFQ, as thermal evaporation is restricted to thin charges or qualified setups.
- Evaporation Method Constraints: E-beam evaporation is preferred; thermal evaporation is only acceptable for thin charges with a fully qualified process setup.
- Material Behavior Considerations: The high melting point (2468°C) and Z-ratio (0.492) must be matched to the evaporation source power and control parameters.
- Procurement Verification: Confirm product model, purity, form, diameter, pack size, and deposition-source compatibility before ordering to ensure proper fit.
What evaporation method is recommended for Niobium wire with 1.0 mm diameter and 99.95% purity?
E-beam evaporation is preferred for this Niobium wire (99.95%, Dia. 1.0 mm) due to its high melting point of 2,468 °C. Thermal evaporation is only acceptable for thin charges or qualified setups, and the material should be used with a water-cooled e-beam hearth or W/Ta support by RFQ.
What are the key compatibility constraints when integrating this Niobium evaporation wire into a deposition system?
The wire form with a diameter of 1.0 mm requires confirmation of deposition source geometry and compatibility with a water-cooled e-beam hearth or W/Ta support. The Z-ratio of 0.492 and density of 8.57 g/cm³ must be matched to the process controller for accurate film thickness monitoring, and the high melting point (2,468 °C) limits thermal evaporation to thin-charge or qualified setups only.
What handling and procurement checks are required before ordering this Niobium evaporation material?
Buyers must confirm the model (AF-NBWIR-99951P0MM), purity (99.95%), form (wire), diameter (1.0 mm), pack size (25g, 100g, 500g, or 1kg), and deposition-source compatibility before quotation. Certificate of analysis, safety data sheet, shipment conditions, and export requirements should be reviewed against laboratory use requirements.
This niobium evaporation wire (99.95% purity, 1.0 mm diameter) is suitable for vacuum thin-film deposition, offering high melting point and density, but requires careful matching to evaporation source and method, with thermal evaporation limited to specific configurations.
Positive
- High purity and defined wire form: Niobium wire with 99.95% purity and 1.0 mm diameter ensures consistent evaporation behavior and source loading for vacuum thin-film deposition.
- High melting point and density: Melting point of 2,468°C and density of 8.57 g/cm³ provide stable evaporation characteristics for high-temperature applications.
Trade-offs
- Evaporation method compatibility: E-beam evaporation is preferred; thermal evaporation is only suitable for thin charges or qualified setups, limiting direct applicability in some deposition systems.
- Requires pre-quotation confirmation: Buyers must confirm deposition source geometry, pack size, and certificate requirements before ordering to ensure compatibility with laboratory infrastructure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
