|
Magnesium (Mg) Evaporation Material, Ribbon/Wire, 99.99%, Ribbon/Wire on request
Product Type: Pure Metal Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This material must be processed using thermal evaporation sources fabricated from tungsten, molybdenum, or tantalum. Deposition parameters require calibration based on the material's melting point, density, and Z-ratio to achieve consistent film properties.
- Source Material Compatibility: The evaporation source must be constructed from W, Mo, or Ta and configured as a filament, basket, coil, or boat to withstand the 649°C melting point.
- Geometric Fit Requirement: The ribbon/wire form requires a custom size specification to ensure proper mechanical fit and electrical contact within the evaporation source.
- Deposition Rate Calibration: The Z-ratio of 1.61 must be entered into the deposition controller to correct for the material's acoustic impedance during rate monitoring.
- Process Parameter Adjustment: The density of 1.74 g/cm³ influences the material's evaporation behavior and should be used to set power ramping profiles for uniform film growth.
What is the melting point and density of this Magnesium evaporation material, and how do they influence thermal evaporation?
The melting point is 649°C and density is 1.74 g/cm³, as specified in the technical data. These values are typical for magnesium and directly affect the thermal evaporation process: the relatively low melting point allows efficient evaporation at moderate temperatures, while the density influences material behavior during deposition. The product is designed for thermal/resistive evaporation using W/Mo/Ta sources.
What type of evaporation source is recommended for this Magnesium ribbon/wire material?
The product is recommended for use with W/Mo/Ta filament, basket, coil, or boat sources in thermal/resistive evaporation, as stated in the technical specifications. This compatibility ensures the material can be deposited using common laboratory hardware without requiring specialized source modifications.
What are the available pack sizes and how should I specify the required dimensions for this Ribbon/Wire material?
The material is available in 100g, 500g, and 1kg packs. The dimensions are listed as 'Ribbon/Wire on request,' meaning you must specify the required size range when ordering to ensure compatibility with your evaporation source geometry. The procurement checklist advises confirming the model, purity, form, size range, and pack size before quotation.
Magnesium (Mg) evaporation material supplied as Ribbon/Wire with 99.99% purity, melting point 649°C, density 1.74 g/cm³, and Z-ratio 1.61, suitable for thermal/resistive evaporation using W/Mo/Ta sources. Size dimensions are specified on request, and pre-order confirmation of source compatibility is required.
Positive
- Defined purity and material identity: Material is specified as Magnesium (Mg) with 99.99% purity, enabling reproducible thin-film deposition and clear procurement matching.
- Customizable ribbon/wire dimensions: Physical form is Ribbon/Wire with dimensions supplied on request, allowing adaptation to varied evaporation source geometries and loading requirements.
Trade-offs
- Size dimensions must be specified: Ribbon/Wire dimensions are provided on request, requiring the buyer to define exact size range before order, which adds a coordination step.
- Source compatibility must be confirmed: Deposition source hardware (W/Mo/Ta filament, basket, coil, or boat) must be matched to material behavior and melting point, necessitating pre-quotation engineering review.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
