|
Iron (Fe) Evaporation Material, Wire, 99.99%, Dia. 2.0 mm
Product Type: Pure Metal Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Iron (Fe) evaporation wire requires matching to thermal/resistive evaporation sources such as W/Mo/Ta filaments, baskets, coils, or boats. Deposition must be performed under vacuum conditions with consideration of the material's melting point and Z-ratio for process control.
- Evaporation Source Types: Use only W/Mo/Ta filament, basket, coil, or boat sources for thermal/resistive evaporation of iron wire.
- Process Parameter Matching: Adjust evaporation parameters based on the material's melting point of 1535°C and Z-ratio of 0.349 to achieve consistent film deposition.
- Vacuum Environment: Perform evaporation in a vacuum chamber to maintain film purity and control deposition rate.
- Deposition Source Geometry: Confirm that the wire diameter (2.0 mm) and source geometry are compatible to ensure proper wire feeding and evaporation.
How does the Z-ratio of 0.349 affect deposition rate monitoring and film thickness control during thermal evaporation of iron wire?
The Z-ratio of 0.349 is used in quartz crystal microbalance (QCM) monitoring to correct for acoustic impedance mismatch between the deposited material and the quartz crystal. For iron, this specific value must be entered into the deposition controller to ensure accurate real-time thickness measurement. The product documentation explicitly provides this Z-ratio for precise process setup.
What evaporation source materials and configurations are compatible with this 2.0 mm diameter iron wire?
The iron wire is compatible with thermal/resistive evaporation using W (tungsten), Mo (molybdenum), or Ta (tantalum) filaments, baskets, coils, or boats. The 2.0 mm wire diameter is suitable for loading into these source geometries, and the 1535°C melting point requires source materials that can withstand sustained temperatures above that threshold, which W, Mo, and Ta satisfy.
What are the key thermal and physical parameters that influence evaporation rate and film quality for this iron wire?
The melting point is 1535°C and the density is 7.86 g/cm³ as stated in the product specifications. These values are critical for setting the evaporation temperature and calculating the deposition rate. Additionally, the Z-ratio of 0.349 must be used for quartz crystal microbalance thickness monitoring to achieve accurate film thickness control.
Iron (Fe) evaporation material wire with 99.99% purity and 2.0 mm diameter, suitable for thermal resistive evaporation using W/Mo/Ta sources. High melting point (1,535°C) requires appropriate thermal management, and pre-purchase validation of source geometry and documentation is necessary.
Positive
- High purity with defined material identity: 99.99% purity and explicit Fe specification enable consistent deposition and film quality, critical for research-grade thin-film applications.
- Flexible evaporation source compatibility: Wire form (2.0 mm dia.) is compatible with W/Mo/Ta filament, basket, coil, or boat sources, allowing integration into diverse thermal/resistive evaporation setups.
Trade-offs
- High melting point requires thermal management: Melting point of 1,535°C demands robust evaporation source hardware and careful process control to avoid thermal stress or incomplete evaporation.
- Pre-purchase validation required for deployment: Buyers must confirm deposition source geometry, certificate requirements, and shipment conditions before ordering, adding a qualification step to procurement.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
