Atomfair Solvent-Based Cerium Oxide Dispersion, 20% or 30% Solid Content
Product Description
Atomfair solvent-based cerium oxide dispersion is supplied with 20% or 30% solid content. It is formulated with methyl ethyl ketone, isopropanol, butyl acetate, propylene glycol monoethyl ether or other selectable solvents as the solvent.
|
Technical Specifications
|
||||||||||
|
Customization & Ordering
Custom specifications, quantities, and packaging may be available upon request. Submit the required specification and delivery timeline through Request a Quote.
Key Features and Advantages
- Solid Content: 20% or 30%
- Solvent: Methyl ethyl ketone, Isopropanol, Butyl acetate, propylene glycol monoethyl ether or other selectable solvents
APPLICATION SCOPE: Contact Atomfair for application-specific guidance.
DOCUMENTATION: COA and SDS can be provided upon request for batch-specific confirmation.
LABORATORY PROCUREMENT SUPPORT
For grade selection, particle-size confirmation, documentation support or custom specification review, contact our technical sales team.
Atomfair solvent-based cerium oxide dispersion contains a volatile organic solvent carrier and requires sealed containment to prevent solvent loss. Store away from ignition sources and in a well-ventilated area to reduce evaporation and flammability risk.
- Volatile Solvent Containment: Keep the container tightly sealed whenever the dispersion is not being dispensed to prevent solvent evaporation.
- Ignition Source Avoidance: Keep the dispersion away from open flames, sparks, and heated surfaces because the carrier solvent is flammable.
- Solvent Compatibility: Confirm that all storage and transfer equipment is compatible with the specific solvent system supplied.
- Storage Environment: Store the sealed container in a well-ventilated location away from direct sunlight and heat sources.
This procedure describes safe receipt, transfer, and storage of a solvent-based cerium oxide dispersion. Follow these steps to reduce solvent evaporation and ignition risk during routine handling.
Required Equipment: Chemical fume hood or well-ventilated worksurface, Solvent-compatible transfer container
- Inspect Container
Inspect the received container for leaks, bulging, or damage before opening. - Transfer Dispersion
Transfer the dispersion in a chemical fume hood or well-ventilated area using solvent-compatible equipment. - Reseal Container
Close the container immediately after each use to limit solvent evaporation. - Store Sealed Container
Store the sealed container away from ignition sources, heat, and direct sunlight.
What are the technical differences between the 20% and 30% solid content versions of this cerium oxide dispersion?
The dispersion is supplied at either 20% or 30% solid content by weight. The 30% version offers a higher concentration of cerium oxide per volume, which can reduce the number of coating passes or the amount of solvent needed for a given solids loading, while the 20% version provides a lower viscosity and easier handling in dilute formulations. Both are available in the same solvent systems, and the choice depends on your target film thickness and deposition method.
Which solvent systems are compatible with this solvent-based cerium oxide dispersion, and can they be customized?
The dispersion is formulated in methyl ethyl ketone, isopropanol, butyl acetate, propylene glycol monoethyl ether, or other selectable solvents. This allows you to match the solvent to your existing process chemistry or to select a solvent with a desired evaporation rate or safety profile. For custom solvent requirements beyond the listed options, custom specifications are available upon request through the quote process.
What batch-specific documentation and application support are provided with this cerium oxide dispersion?
Certificates of Analysis (COA) and Safety Data Sheets (SDS) can be provided upon request for batch-specific confirmation of composition and handling requirements. Atomfair also offers application-specific guidance for grade selection, particle-size confirmation, and custom specification review, which is essential for integrating the dispersion into your process safely and effectively. Contact the technical sales team for these documents and support.
Atomfair solvent-based cerium oxide dispersion is available at 20% or 30% solid content in selectable organic solvents, offering formulation flexibility for coating applications while requiring VOC-compliant handling due to its flammable solvent base.
Positive
- Flexible solid content options: Offered at 20% or 30% solid loading, allowing formulators to adjust coating thickness or solids content without additional dilution steps.
- Selectable solvent system: Choice of methyl ethyl ketone, isopropanol, butyl acetate, or propylene glycol monoethyl ether enables compatibility with diverse resin systems and substrates.
Trade-offs
- Flammable solvent base: The dispersion contains volatile organic solvents, requiring proper ventilation, grounding, and fire-safe handling protocols in laboratory and production environments.
- Fixed solid content increments: Only 20% or 30% solid content are offered, limiting intermediate loading options and requiring dilution or concentration adjustments for custom viscosity or film thickness targets.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
