|
Sintered Titanium and Porous Titanium Foam Sheet, 20 µm Filtration Rating, 100 × 200 × 5 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Porous titanium sheet handling is governed by service-temperature, media-compatibility, cleaning, and mechanical-integrity constraints. Each constraint must be verified against the intended process before installation or use.
- Service temperature limit: Keep the porous titanium sheet at or below the recommended service temperature of 300°C.
- Process compatibility review: Confirm media compatibility, operating pressure, target flow, and dimensional tolerance before quotation or installation.
- Porous surface protection: Protect the porous surface from crushing and contamination throughout handling, storage, and assembly.
- Cleaning method selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning based on the process medium and operating procedure.
- Assembly machining allowance: The sheet's metallic construction can support cutting, welding, and basic machining for assembly integration.
These instructions cover verification, handling protection, cleaning selection, and pre-installation integration for the AF-T110-B0520 porous sheet. Follow them in order to preserve the porous structure and maintain process compatibility.
Required Equipment: Backflushing system, Ultrasonic cleaner, Steam cleaning equipment
- Verify sheet condition
Verify the sheet dimensions, filtration rating, and surface condition against the assembly requirement before handling. - Confirm process limits
Confirm media compatibility, operating pressure, target flow, and service temperature are within the stated limits for the intended process. - Position the sheet
Position the sheet without exposing the porous surface to crushing or contamination during installation. - Clean the sheet
Clean the sheet using backflushing, steam, ultrasonic, or compatible chemical procedures selected for the process medium. - Integrate the sheet
Integrate the sheet into the assembly using cutting, welding, or basic machining only when dimensional adjustment is required.
How does the 110 PPI pore density relate to the 20 µm filtration rating in this sintered titanium foam sheet?
The 110 PPI (pores per inch) describes the cellular structure’s pore density, while the 20 µm value specifies the filtration precision. They are independent parameters; the 20 µm rating indicates the particle size retained, and the 110 PPI structure provides interconnected pathways with ~0.23 mm cell spacing and 35–45% porosity. Both should be reviewed together when matching the sheet to an assembly.
Can this sintered titanium foam sheet be cut or machined to fit custom assemblies?
Yes, the metallic construction supports cutting, welding, and basic machining for assembly integration. However, the porous surface must be protected from crushing and contamination during processing. Custom dimensions are available upon consultation.
What are the recommended cleaning methods for this 20 µm titanium foam filter sheet?
Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures, depending on the process medium and operating procedure. The sheet's corrosion resistance and thermal stability (≤300°C) allow repeated cleaning and reuse in compatible conditions.
This 20 µm, 110 PPI sintered titanium foam sheet provides a 35–45% interconnected porous network in a 100 × 200 × 5 mm format, with a relative air permeability of 1 × 10^-4 L/(cm²·min·Pa). It is suited to liquid/gas filtration, catalyst recovery, and porous-electrode studies up to 300°C, provided media compatibility is verified and the porous surface is protected from crushing.
Positive
- Interconnected porous titanium network: The 110 PPI sheet has 0.23 mm cell spacing and interconnected through-pores, providing a 20 µm filtration rating with low flow resistance and a relative air permeability of 1 × 10^-4 L/(cm²·min·Pa) for liquid and gas separation.
- Corrosion-resistant cleanable metal media: Titanium construction provides corrosion resistance and thermal stability up to 300°C, and the metallic structure supports cutting, welding, basic machining, backflushing, steam, ultrasonic, or compatible chemical cleaning for reuse.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so higher-temperature filtration or process applications require alternative media or thermal validation before installation.
- Porous surface vulnerable to crushing: The porous sheet must be protected from crushing and contamination during handling and cleaning, and the cleaning method must be matched to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
