ATOMFAIR® EB500G-0.001G HIGH-PRECISION ELECTRONIC BALANCELABORATORY INSTRUMENT GRADE
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
TAILORED METROLOGY SOLUTIONS FOR RESEARCH
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
This precision balance requires a vibration-free environment and must be leveled and calibrated before use. The transport security lock must be engaged before relocating the device to prevent damage to the load cell.
- Vibration-Free Environment Requirement: Place the balance on a stable, vibration-free surface to ensure accurate measurements.
- Leveling and Calibration: Level the balance using the adjustable feet and perform calibration with a standard weight prior to each use.
- Transport Lock Requirement: Always secure the transport security lock before moving the balance to avoid structural damage.
Follow these steps to set up the balance in a vibration-free environment and safely handle it. Proper leveling and calibration are essential for accurate measurements.
Required Equipment: Standard calibration weight
- Position the balance
Place the balance on a stable, vibration-free workbench away from drafts and direct sunlight. - Level the balance
Level the balance by adjusting the four feet until the built-in bubble indicator is centered. - Calibrate the balance
Calibrate the balance using a standard calibration weight to ensure accuracy. - Secure transport lock
Secure the transport lock before moving the balance to prevent damage to the load cell.
What is the impact of the EB500G-0.001G's 1 mg readability and ±1 mg repeatability on its suitability for solid-state electrolyte processing?
The balance offers 1 mg readability with ±1 mg repeatability and ±2 mg linearity, making it suitable for precise mass measurements in solid-state electrolyte processing where small weight variations are critical. The 500 g capacity accommodates typical sample sizes, and the glass draft shield minimizes air current interference.
Does the EB500G-0.001G support below-balance density measurements?
Yes, the balance includes a built-in underhook for dynamic below-balance density setups, enabling density determination of solid samples using Archimedes' principle. This feature is directly accessible without additional modifications.
What transport and setup precautions are required for the EB500G-0.001G precision balance?
The balance must be leveled and calibrated in a vibration-free environment before use. A mechanical transit security lock on the glass door must be engaged before relocation to prevent permanent structural cell degradation. The packaging includes specialized display protective shields and robust door transport locks.
The Atomfair EB500G-0.001G precision balance provides 500 g capacity with 1 mg readability, ±1 mg repeatability, and ±2 mg linearity, supported by a glass draft shield and aluminum base for environmental isolation. It requires a vibration-free setup and mandatory transport lock engagement before relocation to prevent load cell damage.
Positive
- High Precision with 1 mg Readability: Provides 500 g capacity with 1 mg readability and ±1 mg repeatability, enabling accurate mass measurement for analytical chemistry and solid-state electrolyte processing.
- Advanced Environmental Isolation Design: Four-sided glass draft shield, aluminum backplate, and under-pan breeze break minimize airflow interference, while the full-aluminum base suppresses low-frequency vibrations for stable weighing.
Trade-offs
- Requires Vibration-Free Setup Environment: The balance must be leveled and calibrated in a vibration-free environment prior to deployment; ambient vibrations can degrade repeatability and linearity performance.
- Transport Security Lock Mandatory for Relocation: The mechanical transit security lock must be engaged before moving the balance to avoid permanent structural load cell degradation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
