PE Battery Separator Base Film 12μm, 60 mm x 100 m
Product Overview
Wet-process polyethylene (PE) separator base film supplied as Wet processPE 12μm 60mm*100m. The source data provides a complete thickness, transport, shrinkage, strength, and thermal profile.
Product Details
| Product name | PE Battery Separator Base Film 12μm, 60 mm x 100 m |
| Source specification | Wet processPE 12μm 60mm*100m |
| Process / coating side | Wet process; uncoated |
| Material | Polyethylene (PE) |
| Process | Wet process |
| Base-film thickness | 12 μm |
| Total thickness | 12 μm |
| Width | 60 mm |
| Roll length | 100 m |
| Areal density | 7.1 g/m² |
| Porosity | 40% |
| Air permeability | 222 sec |
| Thermal shrinkage MD | 0.9% |
| Thermal shrinkage TD | 0.1% |
| Tensile strength MD | 208 kg/cm³ |
| Tensile strength TD | 167 kg/cm³ |
| Puncture strength | 566 g |
| Melting temperature | 135 °C |
Important Note
Note: Slight variations may occur between different production lots of the battery separator. The performance indicators are guaranteed to comply with our product specifications.
Related Products
| Research Need | Related Product | Best For |
|---|---|---|
| Compare nearby specifications | PE Battery Separator Base Film 9μm, 60 mm x 100 m | Same PE base film family for direct specification comparison. |
| Review same-family format | PE Battery Separator Base Film 16μm, 60 mm x 100 m | Same PE base film family for direct specification comparison. |
| Check alternate thickness | PE Battery Separator Base Film 7μm, 60 mm x 100 m | Same PE base film family for direct specification comparison. |
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: inquiry@atomfair.com
|
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This polyethylene separator must be stored in a sealed, dry, ventilated environment at normal or low temperatures to prevent degradation. Avoid exposure to fire, heat sources, and direct sunlight during storage and transportation to maintain dimensional stability and mechanical integrity.
- Sealed storage conditions: Store the separator in a sealed container within a normal or low temperature, dry, and ventilated environment to prevent moisture absorption and contamination.
- Heat and fire avoidance: Keep the separator away from open flames, heat sources, and high-temperature zones to avoid melting, shrinkage, or loss of porosity.
- Sunlight and transport protection: Shield the separator from direct sunlight, fire baking, and rain during transportation to preserve its mechanical and thermal properties.
How does the puncture strength of the 12μm wet process PE separator compare to thinner PE separators for lithium-rich manganese batteries?
The 12μm separator achieves a puncture strength of 566g, significantly higher than the 339g of the 7μm and 410g of the 9μm variants, while maintaining the same 40% porosity. This provides a favorable balance between mechanical robustness and ionic conductivity for high-voltage cathode systems.
What specific compatibility considerations exist for using this PE separator with lithium-rich manganese-based cathode chemistries?
This separator is engineered for lithium-rich manganese-based batteries, which operate at higher voltages up to 4.8V. The PE base film with a melting temperature of 135°C provides adequate thermal stability, and the low transverse heat shrinkage of 0.1% minimizes short-circuit risk during cycling. However, users should verify electrolyte wetting characteristics given the 40% porosity and 222s air permeability.
What are the critical storage and handling requirements to maintain the integrity of this 12μm PE separator?
The separator must be stored sealed in a normal or low temperature, dry, ventilated environment away from fire and heat sources. Transportation must avoid sun exposure, fire baking, and rain. The 12μm thickness makes it susceptible to mechanical damage, so the plastic sealed bag and buffer pad packaging are essential to maintain the 566g puncture strength specification.
This 12μm wet-process PE separator delivers a high puncture strength of 566g and low heat shrinkage (0.9% MD, 0.1% TD), providing mechanical robustness and dimensional stability for lithium-rich manganese-based batteries; however, its 135°C melting point and sensitivity to moisture and heat necessitate controlled storage and thermal management.
Positive
- High puncture strength at 12μm: With a puncture strength of 566g, this separator resists penetration from electrode particles, reducing short-circuit risk during assembly and cycling.
- Low heat shrinkage stability: Longitudinal shrinkage of 0.9% and transverse shrinkage of 0.1% minimize dimensional change under elevated temperatures, preserving electrode alignment.
Trade-offs
- Low melting temperature limit: A melting point of 135°C restricts high-temperature applications and requires careful thermal runaway prevention in battery designs.
- Controlled storage environment needed: The separator must be kept sealed in a cool, dry, ventilated area away from heat sources and sunlight to avoid moisture uptake and thermal degradation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
