|
Laboratory Open-Cell Copper Foam, 40 PPI, 200 × 200 × 20 mm, 1/5 pcs
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For PPI selection, sheet-dimension confirmation, package support or application-specific configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Store the sheets in a clean, dry area to prevent contamination and degradation. Protect the open cellular surface from heavy impact, crushing, and contamination during handling and installation.
- Storage Environment: Store in a clean, dry area to avoid moisture and particulate contamination.
- Physical Protection: Protect the foam from heavy impact, crushing, and deformation to preserve the pore structure.
- Inspection Upon Delivery: Check package condition, sheet dimensions, and visible pore structure before use.
Inspect the copper foam sheet upon delivery and store it properly to maintain structural integrity. Handle the material carefully to avoid damage during subsequent processing.
- Inspect Package and Sheet
Inspect the package condition, sheet dimensions, and visible pore structure upon delivery to confirm product integrity. - Store in Clean Dry Area
Store the sheets in a clean, dry area away from moisture and contaminants to preserve the foam properties. - Protect from Physical Damage
Protect the open cellular surface from heavy impact, crushing, and contamination during all handling and installation procedures.
What is the trade-off between the 40 PPI pore density and the 50–80% porosity range for electrode or catalyst-support applications?
The 40 PPI specification corresponds to a nominal pore pitch of approximately 0.64 mm, which defines the average distance between pore openings. The stated porosity of 50–80% and bulk-density range of 0.1–0.8 g/cm³ indicate that the copper framework can vary in solid fraction, directly affecting electrical conductivity and mechanical stiffness. For electrode or catalyst-support designs, a higher porosity within this range increases internal surface area but reduces the conductive copper cross-section, so the specific porosity value must be confirmed against the required current-collection or thermal-transfer performance.
Can this 200 × 200 × 20 mm copper foam sheet be integrated into a nickel-zinc battery electrode assembly without additional pore-size modification?
Yes, the as-supplied 40 PPI open-cell structure with a through-pore rate of at least 98% is directly suitable for nickel-zinc battery electrode frameworks, as listed in the application scope. The interconnected pore network supports active-material loading and electrolyte flow, but the selection guidance advises confirming pore geometry and integration requirements before ordering. No post-processing for pore-size adjustment is specified, so the 0.64 mm nominal pore pitch should be evaluated against the intended active-material particle size and coating method.
What handling and storage precautions are required to preserve the open-cell structure of this copper foam sheet before installation?
The handling and inspection instructions specify storing the sheets in a clean, dry area and protecting the open cellular surface from heavy impact, crushing, and contamination. After delivery, the package condition, sheet dimensions, and visible pore structure should be checked before cutting, bonding, or installing the material. These precautions are critical because the 20 mm thick foam with 50–80% porosity is mechanically compressible, and any deformation could reduce the through-pore rate below the stated ≥98% minimum.
This 40 PPI open-cell copper foam sheet (200×200×20 mm) provides a high-connectivity porous copper network with ≥98% through-pore rate and porosity of 50–80%, making it suitable for electrode, catalyst, thermal, and filtration applications where internal surface area and metallic conductivity are required.
Positive
- Interconnected open-pore network: The stated through-pore rate of ≥98% and nominal pore pitch of 0.64 mm ensure a continuous porous structure well-suited for fluid flow, electrode current collection, and catalyst support applications.
- High internal surface exposure: With porosity of 50–80% and bulk density of 0.1–0.8 g/cm³, the copper framework provides large accessible surface area for electrochemical reactions, filtration media, and thermal exchange evaluations.
Trade-offs
- Handling sensitivity of porous structure: The open cellular surface must be protected from heavy impact, crushing, and contamination, as the 20 mm thick foam sheet is mechanically delicate and can deform or collapse under pressure.
- Broad porosity and density ranges: Porosity varies between 50–80% and bulk density between 0.1–0.8 g/cm³, so actual values for a given sheet may vary; buyers must confirm application-critical porosity and density requirements before ordering.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
