|
Nickel (Ni) Evaporation Material, Pieces, 99.999%, 3-6 mm
Product Type: Pure Metal Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Nickel evaporation pieces require a vacuum deposition system with a compatible source (Mo/W/Ta boat, graphite/alumina crucible, or e-beam hearth) and method (thermal/resistive or e-beam). The material's melting point (1,453°C) and Z-Ratio (0.331) must be accounted for in process parameters and rate monitoring calibration.
- Evaporation Source Compatibility: Use only Mo/W/Ta boats, graphite/alumina crucibles, or e-beam hearths for thermal or e-beam evaporation.
- Melting Point Requirement: The 1,453°C melting point requires a capable heating system with proper thermal management.
- Z-Ratio Calibration: Set the deposition controller Z-Ratio to 0.331 for accurate film thickness monitoring.
What is the impact of the Z-Ratio of 0.331 on deposition rate monitoring during e-beam evaporation of 99.999% nickel?
The Z-Ratio of 0.331 for nickel, combined with its density of 8.9 g/cm³ and melting point of 1,453°C, requires adjustment of the quartz crystal monitor tooling factor to ensure accurate thickness control during e-beam evaporation. This parameter is critical for process engineers to calibrate deposition rates and achieve repeatable film thickness in high-purity applications.
Which boat or crucible materials are compatible with thermal evaporation of 99.999% nickel pieces?
The 99.999% nickel pieces are compatible with Mo/W/Ta boat, graphite/alumina crucible, or e-beam hearth for thermal/resistive or e-beam evaporation. The choice of source material depends on the evaporation method and required film purity, as the high-purity grade demands a clean, non-reactive crucible or boat to avoid contamination.
Why is the 3–6 mm particle size range specified for the nickel evaporation pieces, and how does it affect source loading?
The pieces are sized 3–6 mm to ensure uniform loading into thermal boats, crucibles, or e-beam hearths, promoting consistent melting behavior and minimizing spitting during evaporation. This size range is typical for laboratory deposition systems to enable stable, repeatable deposition rates and avoid clogging or uneven source consumption.
Nickel (Ni) evaporation material supplied as 3-6 mm pieces with 99.999% purity for thermal or e-beam deposition, requiring careful source matching and procurement verification for reliable thin-film processing.
Positive
- Defined 99.999% purity for controlled deposition: The 99.999% purity specification allows direct comparison with standard and high-purity grades, supporting reproducible thin-film quality in research and production environments.
- Specified 3-6 mm pieces for source loading: The pieces form factor with 3-6 mm sizing is designed to facilitate reliable loading into Mo/W/Ta boats, graphite/alumina crucibles, or e-beam hearths, reducing handling variability.
Trade-offs
- Requires pre-quotation confirmation of multiple parameters: Buyers must confirm deposition source geometry, required quantity, certificate requirements, and shipment conditions before quotation, adding procurement lead time and coordination overhead.
- Evaporation source must be matched to material properties: The evaporation source hardware and process route must be selected based on material behavior, melting point (1453 °C), and film requirements, demanding technical expertise for compatibility.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
