|
Molybdenum Sulfide (MoS2) Evaporation Material, Powder, 99.9%, 100 nm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Molybdenum sulfide (MoS2) evaporation material in powder form requires careful selection of evaporation source hardware to match its melting point and density. The material is compatible with quartz, alumina, or graphite crucibles, tantalum or tungsten boats, and Knudsen cells for thermal evaporation or low-power e-beam deposition.
- Melting Point: The melting point of 1185°C defines the thermal energy required for evaporation.
- Density: The density of 4.8 g/cm³ affects the material's evaporation rate and film thickness uniformity.
- Z-Ratio: The Z-ratio of 1.00 enables accurate thickness monitoring using quartz crystal microbalance.
- Source Compatibility: Evaporation source is limited to quartz, alumina, or graphite crucibles, tantalum or tungsten boats, or Knudsen cells.
Follow these steps to ensure proper handling and deposition source matching for MoS2 powder. Confirm all specifications and review safety documentation before use.
Required Equipment: Quartz crucible, Tantalum boat, Tungsten boat, Knudsen cell
- Confirm Specifications
Confirm the model, purity, form, particle size, and pack size match the laboratory's requirements before ordering. - Review Documentation
Review the certificate of analysis, safety data sheet, and shipment conditions for compliance with laboratory use. - Match Source Hardware
Match the evaporation source hardware and process route to the material's melting point and film requirements.
What is the significance of the Z-Ratio of 1.00 for MoS2 evaporation material in quartz crystal monitoring?
The Z-Ratio of 1.00 indicates that the acoustic impedance of MoS2 matches the default calibration of many quartz crystal microbalances (QCM), allowing direct film thickness monitoring without material-specific correction. This simplifies process setup for thermal or low-power e-beam evaporation, as specified in the technical specifications. Users should verify compatibility with their specific QCM instrument, as the Z-Ratio value is provided for reference.
What parameters must be verified before purchasing MoS2 evaporation material to ensure compatibility with deposition equipment?
Buyers must confirm the model (AF-MOS2PWD-3N100NM), purity (99.9%), physical form (powder), particle size (100 nm), pack size (25g, 100g, 500g, or 1kg), and deposition-source compatibility. The product supports quartz/alumina/graphite crucibles, Ta/W boats, or Knudsen cells for thermal or low-power e-beam evaporation. Matching these parameters is critical to avoid material incompatibility, contamination, or process failure, as emphasized in the PROCUREMENT CHECK section.
What safety documentation is available for MoS2 evaporation material and what does it cover?
The product includes a certificate of analysis and a safety data sheet (SDS) that can be reviewed for handling, storage, and shipment conditions. The SDS is particularly important for the 100 nm powder form, which may require respiratory protection and controlled handling to prevent inhalation. Buyers should request these documents from the supplier to ensure compliance with laboratory safety protocols and export requirements, as noted in the DOCUMENTATION REVIEW section.
Molybdenum Sulfide (MoS2) evaporation material in powder form with 99.9% purity and 100 nm particle size, intended for thermal evaporation or low-power e-beam deposition, but requiring deposition-source compatibility confirmation before ordering.
Positive
- Defined material identity and purity: MoS2 composition with 99.9% purity enables clear procurement matching and process reproducibility for thin-film deposition.
- Specified 100 nm powder form: Powder with 100 nm particle size supports consistent source loading and evaporation behavior in vacuum deposition systems.
Trade-offs
- Deposition-source compatibility must be confirmed: The material is not universally compatible; buyers must verify source hardware (crucible, boat, Knudsen cell) and process route (thermal or low-power e-beam via RFQ) before ordering.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
