|
Iron(III) Oxide (Fe2O3) Evaporation Material, Powder, 99.55%, 18 nm
Product Type: Compound Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This material requires matching of evaporation source hardware and process route to its melting point, density, and Z-ratio for optimal film deposition. Confirmation of deposition source geometry, pack size, and documentation requirements is mandatory before quotation.
- Evaporation Method Preference: E-beam evaporation is the preferred method; thermal evaporation is available by quotation.
- Source Liner Compatibility: Use an E-beam hearth with graphite, alumina, or boron nitride liner, or a tungsten, molybdenum, or tantalum boat.
- Process Matching Required: Hardware and process route must be matched to material behavior, melting point, and film requirements.
- Pre-Confirmation Steps: Confirm deposition source geometry, required quantity, certificate requirements, and shipment conditions before quotation.
How does the 99.55% purity and 18 nm particle size of Iron(III) Oxide evaporation material affect thin-film deposition quality and repeatability?
The 99.55% purity minimizes contaminants that could introduce defects or alter film stoichiometry, while the 18 nm particle size ensures consistent source loading and evaporation behavior. The powder form with nanometer-scale particles supports uniform melting and vaporization in E-beam hearths with graphite, Al2O3, or BN liners, contributing to the stated good E-beam performance.
What evaporation source hardware is compatible with Iron(III) Oxide (Fe2O3) powder for vacuum deposition?
This Fe2O3 evaporation material is optimized for E-beam evaporation using hearths with graphite, Al2O3, or BN liners, or with W/Mo/Ta boats. Thermal evaporation is available by request (RFQ). The material's melting point of 1,565°C, density of 5.24 g/cm³, and Z-ratio of 1.00 should be matched to the deposition source geometry and power capabilities.
What safety and storage conditions are recommended for 18 nm Iron(III) Oxide nanopowder in laboratory settings?
The product description advises reviewing the safety data sheet and confirming shipment conditions before use. As a fine nanopowder with 18 nm particle size, appropriate personal protective equipment and engineering controls (e.g., fume hood, static grounding) are recommended for laboratory handling. Available pack sizes from 25 g to 1 kg allow controlled procurement aligning with usage and storage capacity.
Iron(III) Oxide (Fe2O3) evaporation material, 99.55% purity, 18 nm powder form, is specified for e-beam evaporation with good performance using graphite/Al2O3/BN liners or W/Mo/Ta boats, though thermal evaporation requires RFQ. The defined particle size and purity support controlled thin-film deposition, but buyers must confirm pack size, source compatibility, and documentation before order.
Positive
- Defined high purity and nanoscale particle size: 99.55% purity and 18 nm powder form enable controlled evaporation and film uniformity for research-grade deposition.
- Versatile evaporation source compatibility: Compatible with e-beam hearths using graphite/Al2O3/BN liners or W/Mo/Ta boats, with good e-beam performance, allowing flexibility in deposition hardware.
Trade-offs
- Mandatory pre-order confirmation: Buyers must confirm model, purity, form, size range, pack size, and deposition-source compatibility before ordering, adding procurement lead time.
- Thermal evaporation requires RFQ: Thermal evaporation is not standard and must be requested via quotation, limiting immediate process adoption.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
