ATOMFAIR® EB200G-1MG HIGH-PRECISION ELECTRONIC BALANCELABORATORY INSTRUMENT GRADE
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
TAILORED METROLOGY SOLUTIONS FOR RESEARCH
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The balance requires a vibration-free, level surface and a draft-free environment to maintain ±1 mg repeatability and ±2 mg linearity. The glass draft shield and aluminum base suppress airflow and low-frequency vibrations, but the device must be leveled and calibrated before each use.
- Vibration and Draft Sensitivity: Parasitic cross-currents and ambient vibrations degrade measurement accuracy, necessitating the use of the four-sided glass draft shield and solid aluminum base.
- Transport Lock Requirement: The mechanical transit security lock must be engaged before relocating the balance to prevent permanent structural cell degradation.
- Overload Protection: Automated diagnostic fault tracking and full-range tare thresholds guard against overload-induced sensor damage.
Level the balance on a vibration-free bench using the adjustable feet and built-in bubble level. Perform calibration using the light-touch keys after a 30-minute warm-up period.
Required Equipment: Adjustable leveling feet, Built-in bubble level
- Position the balance
Place the balance on a stable, vibration-free laboratory bench away from drafts and direct sunlight. - Level the device
Adjust the four leveling feet until the bubble in the built-in level is centered. - Power on and warm up
Connect the power supply and allow the balance to warm up for at least 30 minutes to stabilize internal electronics. - Perform calibration
Press the calibration key on the light-touch panel and follow the on-screen prompts using a certified calibration weight. - Verify repeatability
Place a test weight on the pan three times and confirm that readings fall within ±1 mg of each other.
What is the impact of the 1 mg readability on the EB200G-1MG's suitability for gravimetric analysis of solid-state electrolyte materials?
The 1 mg readability (0.001 g) with ±1 mg repeatability and ±2 mg linearity ensures sufficient precision for typical solid-state electrolyte precursor weighing (e.g., 0.1–10 g samples). The 200 g maximum capacity accommodates batch preparations, while the four-sided glass draft shield and aluminum alloy backplate minimize air currents that could affect microgram-level stability.
Can the EB200G-1MG be integrated with below-balance density measurement setups for solid-state electrolyte density determination?
Yes, the balance features a built-in underhook for dynamic below-balance density setups, enabling density measurements of solid samples via Archimedes principle. This is directly supported by the 'dynamic below-balance density setups' capability listed in the product's multi-functional research platform features.
What steps are required to ensure the balance's transport lock is properly engaged before relocation?
The EB200G-1MG includes a mechanical transit security lock on the glass door. Before moving, secure this lock to prevent permanent structural cell degradation. After relocation, the balance must be leveled and calibrated in a vibration-free environment prior to deployment, as stated in the operational notice.
The ATOMFAIR EB200G-1MG is a 200 g capacity analytical balance with 1 mg readability, featuring a four-sided glass draft shield and aluminum alloy base for environmental isolation, but requires a vibration-free leveled surface and transport lock engagement to prevent sensor damage.
Positive
- High precision 1 mg readability: With ±1 mg repeatability and ±2 mg linearity, this balance supports analytical chemistry and solid-state electrolyte processing requiring milligram-level accuracy.
- Advanced environmental isolation: The four-sided glass draft shield, aluminum alloy backplate, and under-pan breeze break block parasitic air currents, improving measurement stability in non-ideal lab conditions.
Trade-offs
- Requires vibration-free environment: The balance must be leveled and calibrated in a vibration-free location prior to use; the transport security lock must be engaged before any relocation to avoid permanent cell degradation.
- Limited to 200 g maximum capacity: With a 200 g max load, this balance is unsuitable for samples or containers exceeding this mass, constraining its application to smaller analytical workloads.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
