Atomfair Automatic Cleaning Machine Product Information
Product Model
Atomfair-ACL-369
Release Date
2022-03-01
Version
V2.0
Dimensions & Weight
- Dimensions: 5000 * 1700 * 2000 mm
- Weight: 2 T
Product Overview
This machine is designed for fully automatic cleaning and drying of dry batteries and supercapacitors. It realizes high-efficiency, water-saving, online continuous cleaning with stable and reliable performance.
Key Features
- Brush online scrubbing, effectively cleans the battery surface and end surfaces.
- Multiple groups of thrust air nozzles for fast water removal and good drying effect.
- Uses only clean water, no cleaning agent required.
- PLC control with fault alarm and energy-saving shutdown.
- Adjustable for products with length 50–180 mm, easy adjustment.
- Suitable for large-capacity automatic online cleaning and drying.
- High-efficiency hot-air heater with low energy consumption.
- Overflow, filtration and circulating water system for energy saving.
Technical Specifications
- Application: Cylindrical batteries, supercapacitors (customizable on request)
- Speed: 0.5–1 m/min, adjustable
- Output: >6 PCS
- Power Supply: 380V ±10%, 50Hz, 3-phase 5-wire
- Cleaning Workpiece: 60mm diameter batteries & capacitors
- Total Power: Approx. 55 KW
- Compressed Air: 0.4 Mpa
- Noise: ≤85 dB (test at 1.5m)
- Dimensions: 5000*1700*2000 mm
- Weight: Approx. 2 T
- Environment: 5–35℃, humidity ≤80%
If you’re interested, have any questions, or have specific customization requirements, please feel free to contact us at inquiry@atomfair.com.
Operate the Atomfair-ACL-369 automatic cleaning machine only within the stated 5–35°C ambient temperature range and ≤80% relative humidity environment. Connect the 380V ±10%, 50Hz, 3-phase 5-wire power supply and 0.4 Mpa compressed air supply before operation.
- Environmental limits: Operate the machine only in an environment maintained at 5–35°C with relative humidity ≤80%.
- Electrical supply: Connect the machine to a 380V ±10%, 50Hz, 3-phase 5-wire power source with capacity for approximately 55 kW total power.
- Compressed air supply: Supply compressed air at 0.4 Mpa to the air nozzle system for water removal and drying.
- Water system: Use only clean water in the overflow, filtration and circulating water system because no cleaning agent is required.
- Noise exposure: The machine's noise output is ≤85 dB when measured at 1.5 m during operation.
Set up the Atomfair-ACL-369 for automatic online cleaning and drying of cylindrical batteries and supercapacitors. Configure the adjustable workpiece length and conveyor speed, then start the PLC-controlled cycle and monitor the fault alarm.
Required Equipment: PLC control system, Compressed air supply, Hot-air heater, Overflow, filtration and circulating water system
- Verify utilities
Verify that the 380V ±10%, 50Hz, 3-phase 5-wire power supply and 0.4 Mpa compressed air are connected and available. - Set workpiece dimensions
Set the cleaning workpiece diameter and product length to match the 60 mm battery or capacitor dimensions within the 50–180 mm adjustable range. - Fill water system
Fill the overflow, filtration and circulating water system with clean water only. - Adjust conveyor speed
Adjust the conveyor speed to between 0.5 and 1 m/min according to the required cleaning output. - Start cleaning cycle
Start the PLC-controlled automatic cleaning cycle and monitor the fault alarm for abnormal conditions. - Confirm dryer operation
Confirm the hot-air heater is active before continuous cleaning begins. - Stop machine
Stop the machine using the energy-saving shutdown function after the cleaning run is complete.
What is the maximum production throughput of the Atomfair-ACL-369 automatic cleaning machine?
The Atomfair-ACL-369 achieves an output of greater than 6 PCS per minute, with a conveyor speed adjustable between 0.5 and 1 m/min. This throughput is supported by its brush scrubbing and multi-group air nozzle drying stages, which are designed for continuous online cleaning of cylindrical batteries and supercapacitors.
Can the Atomfair-ACL-369 be integrated into an existing production line for cleaning 60mm diameter batteries?
Yes, the machine is designed for online continuous cleaning and can be integrated into existing lines. It accommodates workpieces with a diameter of 60 mm and a length range of 50–180 mm, with adjustable settings for easy changeover. The PLC control system supports automated operation, and the machine requires a 380V ±10%, 50Hz, 3-phase 5-wire power supply and compressed air at 0.4 Mpa.
What are the utility and environmental requirements for operating the Atomfair-ACL-369?
The machine requires a 380V ±10%, 50Hz, 3-phase 5-wire power supply with a total power of approximately 55 KW, and compressed air at 0.4 Mpa. It operates in an ambient temperature of 5–35°C with humidity ≤80%, and produces noise levels ≤85 dB measured at 1.5 meters. The cleaning process uses only clean water, with an overflow, filtration, and circulating water system to minimize water consumption.
The Atomfair-ACL-369 is a PLC-controlled, fully automatic cleaning and drying system for cylindrical batteries and supercapacitors, using brush scrubbing and hot-air drying with a closed-loop water filtration circuit. It is designed for inline integration with adjustable speed and product length, but requires a 380V 3-phase 5-wire supply, 0.4 MPa compressed air, and a 55 kW power connection, with a 2-ton footprint and 85 dB noise output.
Positive
- Water-only cleaning with closed-loop filtration: Uses only clean water with an overflow, filtration, and circulating water system, eliminating chemical agents and reducing water consumption while maintaining consistent cleaning quality.
- Adjustable for 50–180 mm product lengths: The machine can be adjusted for products with lengths from 50 to 180 mm, and speed is adjustable from 0.5 to 1 m/min, enabling flexible integration into different production lines.
Trade-offs
- Requires 380V 3-phase 5-wire and 55 kW supply: The system demands a 380V ±10%, 50Hz, 3-phase 5-wire power source with approximately 55 kW total power, which may require dedicated electrical infrastructure and higher operating costs.
- Needs 0.4 MPa compressed air and 2-ton floor space: Operation requires a compressed air supply at 0.4 MPa and a substantial footprint of 5000×1700×2000 mm weighing about 2 tons, necessitating adequate floor space and utility connections.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).