2AH HIGH-PERFORMANCE AND HIGH-SAFETY SOLID-STATE BATTERY | ATOMFAIRCOMMERCIAL GRADE · PRODUCTION
|
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: INQUIRY@ATOMFAIR.COM
|
|||||||||||||||||||||||||||||||||||
|
MANUFACTURER: ATOMFAIR LLC
BRAND: ATOMFAIR®
|
This solid-state battery requires strict adherence to charge and discharge limits to prevent thermal runaway. Storage must be in a dry, ventilated area between 15-30°C with protection from physical damage.
- Charge Rate Limit: Do not exceed a continuous charge rate of 2C or a continuous discharge rate of 5C.
- Peak Discharge Condition: For peak discharge at 10C for up to 5 seconds, ensure the state of charge is at least 30%.
- Temperature Range: Charge and discharge only within the operating temperature range of -20°C to 70°C.
- Storage Environment: Store the battery in a dry, ventilated area at 15-30°C to maintain stability.
- Prohibited Actions: Do not disassemble, puncture, or expose the battery to fire.
Follow these steps to safely initialize, charge, and store the solid-state battery. Always adhere to the specified electrical and thermal limits to prevent damage or hazard.
- Inspect Packaging
Inspect the shock-damping transport packaging for any signs of damage before opening. - Verify Temperature
Confirm the battery temperature is within the -20°C to 70°C range before initiating charge or discharge. - Set Charge Parameters
Configure the charger to a maximum continuous charge rate of 2C and connect the battery. - Monitor During Operation
Monitor the battery voltage and temperature during charging and discharging to ensure limits are not exceeded. - Store Properly
Store the battery in a dry, ventilated area at 15-30°C when not in use, away from flammable materials.
How does the solid-state electrolyte in this 2Ah pouch cell achieve both high energy density (300 Wh/kg) and high discharge rates (5C continuous, 10C peak)?
The composite solid-state electrolyte (C-SSE) eliminates liquid leakage risks and enhances thermal stability, allowing the NCM-Gr/Si,C-SSE chemistry to deliver 300 Wh/kg gravimetric and 695 Wh/L volumetric energy density while supporting 5C continuous discharge and 10C peak discharge (5s). The solid-state framework also enables 2C fast charging.
What are the operating temperature limits for charging and discharging this solid-state battery?
The battery operates reliably from -20°C to +70°C. However, charging must be within that temperature range and not exceed 2C continuous charge. For peak discharge (10C, 5s), the state of charge must be ≥30%. Storage should be in a dry, ventilated area between 15-30°C.
What safety and handling precautions are required for this solid-state pouch cell?
The solid-state electrolyte eliminates liquid leakage risks, but the battery must not be disassembled, punctured, or exposed to fire. Charge within -20°C to 70°C, do not exceed 2C charge or 5C continuous discharge, and for 10C peak ensure SOC≥30%. Store at 15-30°C in dry, ventilated conditions. Shipping is in shock-damping hazardous material packaging.
This 2Ah solid-state pouch cell delivers 300 Wh/kg energy density and 695 Wh/L volumetric density using a composite solid-state electrolyte, supporting 5C continuous discharge and operation from -20°C to 70°C, but is limited to 300 cycles at 80% capacity retention under 1C/4C cycling.
Positive
- Ultra-high gravimetric and volumetric energy density: Achieves 300 Wh/kg and 695 Wh/L, enabling extended runtime in space-constrained applications such as drones and portable medical devices.
- Wide operating temperature range: Reliable operation from -20°C to +70°C, suitable for outdoor and industrial environments without active thermal management.
Trade-offs
- Limited cycle life at high-rate usage: Maintains ≥80% capacity for only 300 cycles under 1C/4C charge/discharge, which may require frequent replacement in high-cycle applications like power tools.
- Strict charge and discharge rate constraints: Continuous charge limited to 2C and continuous discharge to 5C; peak 10C discharge requires SOC ≥30%, and storage must be at 15-30°C, adding operational planning requirements.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
