Atomfair Tantalum Boride (TaB) Powder, 99.9% Purity, -325 Mesh
Product Description
Atomfair Tantalum Boride (TaB) is supplied as powder with 99.9% purity and a -325 mesh specification. It is intended for hard boride and oxidation- and corrosion-resistant materials research.
Technical Specifications
| Parameter | Specification / Available Values |
|---|---|
| Product | Tantalum Boride (TaB) Powder |
| Chemical Formula | TaB |
| CAS Number | 12007-07-7 |
| Purity | 99.9% |
| Specification | -325 mesh |
| Physical State | Powder |
Key Features and Advantages
- Purity specification: 99.9%.
- Mesh specification: -325 mesh.
- Product form: powder.
APPLICATION SCOPE: High-hardness tantalum-boride materials, thin-film or crystal studies, and oxidation- and acid-corrosion-resistance research.
DOCUMENTATION: COA and SDS can be provided upon request for batch-specific confirmation.
LABORATORY PROCUREMENT SUPPORT
For grade selection, particle-size confirmation, documentation support or custom specification review, contact our technical sales team.
This powder is intended for hard boride and oxidation- and corrosion-resistant materials research. Storage and handling must prevent moisture contamination and oxidation to maintain purity and particle size integrity.
- Oxidation Sensitivity: Exposure to air and moisture may degrade the powder's surface chemistry and reduce its effectiveness in oxidation-resistant applications.
- Particle Size Integrity: Agglomeration or compaction can alter the -325 mesh distribution, requiring gentle handling and sealed storage.
This procedure covers safe transfer and storage of TaB powder for materials research. Steps assume use in a controlled laboratory environment with standard inert-gas glovebox access.
Required Equipment: Inert-gas glovebox or sealed transfer vessel, Stainless steel spatula, Antistatic weighing paper or container
- Prepare Glovebox Atmosphere
Purge the glovebox with argon or nitrogen to maintain oxygen and moisture levels below 1 ppm before opening the container. - Open Container
Cut the outer seal and carefully lift the inner lid inside the glovebox to avoid disturbing the powder. - Transfer Powder
Use a clean stainless steel spatula to transfer the required amount onto antistatic weighing paper or into a pre-weighed container. - Reseal Container
Immediately reseal the original container with its inner lid and outer cap to minimize air exposure. - Store Container
Store the sealed container in a desiccator or inert-atmosphere cabinet at room temperature away from direct sunlight.
What does the 99.9% purity and -325 mesh specification mean for Atomfair TaB powder?
The powder is supplied at 99.9% purity and screened to a -325 mesh particle-size specification, as stated in the product specification. This fine-powder form is intended for high-hardness tantalum-boride materials and thin-film or crystal studies. No particle-size distribution beyond the -325 mesh specification is listed.
Is this TaB powder suitable for oxidation- and acid-corrosion-resistance research?
Yes. The product description explicitly lists oxidation- and acid-corrosion-resistance research within its application scope, along with high-hardness tantalum-boride materials and thin-film or crystal studies. The material is identified as tantalum boride (TaB, CAS 12007-07-7) in powder form at 99.9% purity.
Can batch-specific COA and SDS documentation be obtained before handling this TaB powder?
Yes, COA and SDS can be provided upon request for batch-specific confirmation, according to the product documentation note. Contact Atomfair's technical sales team to request the documentation or discuss grade selection, particle-size confirmation, and custom specification review.
Atomfair TaB powder (99.9%, -325 mesh) provides a defined-purity, fine-powder feed for hard-boride and oxidation/corrosion-resistance research, but end users should confirm particle-size distribution and downstream processing requirements before deployment.
Positive
- 99.9% Purity for Research: The 99.9% purity specification defines the starting material quality for hard-boride and oxidation-/corrosion-resistance research, providing a consistent chemical basis for experimental work.
- -325 Mesh Powder for Application Scope: The -325 mesh powder form is directly matched to the stated application scope of high-hardness tantalum boride materials, thin-film or crystal studies, and oxidation/acid-corrosion research.
Trade-offs
- Particle-Size Distribution Not Stated: Only the -325 mesh sieve cut is specified; researchers needing a defined particle-size distribution must contact Atomfair for confirmation before relying on uniformity-dependent results.
- Powder Requires Downstream Processing: The product is supplied as powder, so dense, thin-film, or crystalline end-forms require additional consolidation or deposition processing by the end user.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
