Atomfair Aluminum Boride (AlB2) Powder, 99.5% Purity, Approx. -325 Mesh
Product Description
Atomfair Aluminum Boride (AlB2) is supplied as powder with 99.5% purity and an approximately -325 mesh specification. It is intended for conductive layered-boride and crystal-structure research.
Technical Specifications
| Parameter | Specification / Available Values |
|---|---|
| Product | Aluminum Boride (AlB2) Powder |
| Chemical Formula | AlB2 |
| CAS Number | 12041-50-8 |
| Purity | 99.5% |
| Specification | Approximately -325 mesh |
| Physical State | Powder |
Key Features and Advantages
- Purity specification: 99.5%.
- Mesh specification: Approximately -325 mesh.
- Product form: powder.
APPLICATION SCOPE: Layered boride crystal-structure studies and metallic-conductivity research along the basal-plane direction.
DOCUMENTATION: COA and SDS can be provided upon request for batch-specific confirmation.
LABORATORY PROCUREMENT SUPPORT
For grade selection, particle-size confirmation, documentation support or custom specification review, contact our technical sales team.
Store in a dry, inert atmosphere to prevent moisture-induced degradation of the reactive boride surface. Avoid exposure to strong oxidizers due to potential exothermic reaction.
- Moisture Sensitivity: Minimize atmospheric exposure by storing in sealed containers under argon or nitrogen.
- Oxidizer Incompatibility: Keep away from strong oxidizing agents to prevent uncontrolled reaction.
Use in a glovebox or fume hood to control airborne particulate and moisture exposure. Dispense only the required amount to minimize waste and contamination.
Required Equipment: Inert-atmosphere glovebox or fume hood, Antistatic spatula, Sealable container
- Prepare workspace
Purge the glovebox with inert gas to below 1 ppm oxygen and moisture before opening the container. - Open container
Slowly open the sealed container inside the glovebox to avoid aerosolizing fine powder. - Dispense powder
Transfer the required mass using an antistatic spatula to prevent electrostatic charge buildup. - Reseal container
Immediately reseal the container after dispensing to limit moisture ingress. - Decontaminate tools
Wipe all tools with a dry lint-free cloth and store them in a dedicated dry area.
What does the approximately -325 mesh specification mean for the AlB2 powder's particle size and how does it affect its use in layered boride research?
The approximately -325 mesh specification indicates that the powder passes through a 325-mesh sieve, corresponding to a nominal particle size of about 44 microns or finer. This fine particle size is suitable for preparing samples for layered boride crystal-structure studies and for investigating metallic conductivity along the basal-plane direction, as it facilitates uniform dispersion and surface interactions.
Can the AlB2 powder be used directly in high-temperature or vacuum-based synthesis processes, and what handling precautions are necessary?
The product is supplied as a powder with 99.5% purity and is intended for research applications involving layered boride structures and metallic conductivity. While the source does not specify thermal stability limits, standard handling precautions for fine reactive powders apply, including the use of inert atmosphere or vacuum if oxidation is a concern. Always refer to the SDS for specific safety and storage guidance, which can be requested from the supplier.
What documentation is available to verify the batch-specific purity and particle size of the AlB2 powder?
A Certificate of Analysis (COA) and Safety Data Sheet (SDS) can be provided upon request for batch-specific confirmation of purity and other specifications. This documentation supports quality assurance for research and procurement, and the technical sales team can assist with grade selection and particle-size confirmation.
Atomfair Aluminum Boride (AlB2) is a 99.5% pure, approximately -325 mesh powder offered in 50g, 100g, and 250g packages. It is specified for layered-boride crystal-structure research and basal-plane metallic-conductivity studies, with batch-specific COA/SDS available on request.
Positive
- 99.5% Purity for Layered Boride Studies: The stated 99.5% purity specification provides a defined chemical baseline for layered-boride crystal-structure studies and metallic-conductivity measurements along the basal-plane direction.
- Fine -325 Mesh Powder Form: The approximately -325 mesh classification confirms a fine powder form suitable for sample preparation in crystal-structure and basal-plane conductivity experiments.
Trade-offs
- Request Batch-Specific Documentation: COA and SDS are not included in the product listing; they must be requested to confirm batch-specific purity and particle-size details.
- Approximate Particle Size Specification: The -325 mesh designation is approximate, so researchers requiring a tightly controlled particle-size distribution must confirm the actual sieve analysis with the supplier before use.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
