Atomfair Tin(II) Fluoride (SnF₂), 99.95% Purity, Custom Particle Sizes Down to 1 μm
Product Description
Atomfair tin(II) fluoride is supplied with 99.95% purity and is available with custom particle sizes down to 1 μm. Iron content is <5 ppm; cobalt, nickel, copper, cadmium, chromium, and titanium are each <1 ppm. It is intended for toothpaste and electroplating research.
Technical Specifications |
||||||||||||||||
|
Customization & Ordering
Custom particle sizes down to 1 μm are available upon request. Please include the required particle size, quantity, and packaging when requesting a quotation.
Key Features and Advantages
- Purity: 99.95%.
- Iron content: <5 ppm; Co, Ni, Cu, Cd, Cr, and Ti: <1 ppm each.
- Drying loss: 0.32%.
APPLICATION SCOPE: toothpaste and electroplating research.
DOCUMENTATION: COA and SDS can be provided upon request for batch-specific confirmation.
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
Store tin(II) fluoride in a dry, inert atmosphere to prevent hydrolysis and oxidation. Avoid exposure to moisture and air, which can degrade the material and introduce impurities.
- Moisture Sensitivity: Drying loss of 0.32% indicates hygroscopic behavior requiring sealed storage with desiccant.
- Contamination Risk: Trace metal impurities (Fe <5 ppm; Co, Ni, Cu, Cd, Cr, Ti <1 ppm each) may increase if handled with non-dedicated equipment.
Transfer the powder in a glovebox under argon or nitrogen to maintain purity and prevent moisture uptake. Use clean, dry spatulas and containers to avoid cross-contamination.
Required Equipment: Inert-atmosphere glovebox, Clean, dry stainless steel spatula
- Prepare Glovebox Environment
Purge the glovebox with argon or nitrogen until oxygen and moisture levels are below 1 ppm. - Weigh Required Amount
Transfer the desired mass of tin(II) fluoride into a pre-weighed, clean glass vial using a dry spatula. - Seal Container Immediately
Cap the vial tightly and seal with Parafilm before removing from the glovebox to prevent moisture ingress.
What are the critical trace metal impurity limits in Atomfair SnF₂ for electroplating research?
Iron is specified at <5 ppm, while cobalt, nickel, copper, cadmium, chromium, and titanium are each <1 ppm. These low transition-metal levels are essential to avoid bath contamination and deposit defects in electroplating studies.
Can Atomfair tin(II) fluoride be supplied with a particle size below 1 μm for toothpaste formulation research?
Custom particle sizes down to 1 μm are available upon request. The product is supplied with 99.95% purity and a drying loss of 0.32%, making it suitable for controlled fluoride-release studies in toothpaste research.
What documentation is provided with Atomfair SnF₂ for batch-specific quality verification?
A Certificate of Analysis (COA) and Safety Data Sheet (SDS) can be provided upon request for batch-specific confirmation. This supports traceability and compliance in institutional research settings.
Atomfair Tin(II) Fluoride (SnF₂) 99.95% purity with custom particle sizes down to 1 μm offers high-purity source material with controlled trace metal levels, suitable for toothpaste and electroplating research, though a 0.32% drying loss indicates moisture sensitivity requiring careful handling.
Positive
- High Purity with Trace Metal Control: 99.95% purity with iron <5 ppm and Co, Ni, Cu, Cd, Cr, Ti each <1 ppm minimizes contamination in sensitive electroplating and toothpaste research.
- Custom Particle Size Down to 1 μm: Allows precise tailoring of surface area and reactivity for application-specific requirements in electroplating and toothpaste formulation studies.
Trade-offs
- Drying Loss of 0.32%: Indicates residual moisture or volatiles; material may require pre-drying or controlled storage to maintain reproducible performance.
- Application Scope Limited to Research: Explicitly validated for toothpaste and electroplating research only; users must verify compatibility for alternative applications without stated support.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
