Atomfair Erbium Nitride (ErN) Powder, 99.9% Purity, −60 Mesh
Product Description
Atomfair erbium nitride (ErN) is supplied as powder with 99.9% purity and a -60 mesh particle specification. It is intended for MLCC, ceramic, crystal, and luminescent materials research.
Technical Specifications
| Parameter | Specification / Available Values |
|---|---|
| Product | Erbium Nitride (ErN) Powder |
| Chemical Formula | ErN |
| CAS Number | 12020-21-2 |
| Purity | 99.9% |
| Particle Specification | -60 mesh |
| Physical State | Powder |
Customization & Ordering
Alternative purity, particle-size, and package requirements may be evaluated upon request. Minimum order quantities, pricing, and lead times are confirmed during quotation.
Key Features and Advantages
- Source-listed purity of 99.9% with a -60 mesh particle specification.
- Powder format for MLCC, ceramic, crystal, and luminescent materials research.
APPLICATION SCOPE: MLCC, ceramic, crystal, and luminescent materials research
DOCUMENTATION: COA and SDS can be provided upon request for batch-specific confirmation.
LABORATORY PROCUREMENT SUPPORT
For grade selection, particle-size confirmation, documentation support or custom specification review, contact our technical sales team.
Erbium nitride powder is moisture-sensitive and may hydrolyze upon exposure to ambient humidity. Storage under inert atmosphere or in a desiccator is recommended to maintain chemical integrity.
- Moisture Sensitivity: Minimize exposure to atmospheric moisture to prevent hydrolysis and degradation of the nitride compound.
- Inert Atmosphere Storage: Store the powder in an argon-filled glovebox or sealed container with desiccant to preserve purity and particle characteristics.
Transfer the powder under inert atmosphere to avoid moisture-induced degradation. Weigh and dispense using standard powder handling techniques for fine particulates.
Required Equipment: Argon-filled glovebox or nitrogen-purged dry box, Stainless steel spatula, Analytical balance with anti-static kit
- Prepare inert atmosphere
Purge the glovebox or dry box with argon or nitrogen until oxygen and moisture levels are below 1 ppm. - Open container
Transfer the sealed ErN powder container into the inert atmosphere before opening to prevent moisture ingress. - Weigh powder
Dispense the required amount onto a pre-tared weighing boat using a clean stainless steel spatula. - Seal remainder
Reseal the original container immediately after use and return it to the desiccator or glovebox storage.
What does the -60 mesh specification mean for Atomfair ErN powder, and what particle size distribution should be expected?
The -60 mesh specification indicates that the ErN powder passes through a 60-mesh sieve; the product listing does not state a measured particle size distribution or a micron-range upper limit. For batch-specific particle-size data or sieve retention values, request the COA or contact Atomfair technical sales for particle-size confirmation.
Can 99.9% ErN powder be used for MLCC, ceramic, crystal, and luminescent materials research?
Yes. Atomfair lists this ErN powder as intended for MLCC, ceramic, crystal, and luminescent materials research. It is supplied with 99.9% purity, a -60 mesh particle specification, and CAS number 12020-21-2 in powder form. If a different purity or particle size is needed for a specific application, alternative specifications may be evaluated on request.
What batch documentation is available to verify the 99.9% purity and handling requirements of this ErN powder?
COA and SDS can be provided upon request for batch-specific confirmation. The product is available in 1 g, 5 g, and 10 g packages, and minimum order quantities, pricing, and lead times are confirmed during quotation. For handling and safety requirements, request the SDS before working with the material.
Atomfair ErN powder at 99.9% purity and -60 mesh offers a defined nitride starting material for MLCC, ceramic, crystal, and luminescent research; the 1 g, 5 g, and 10 g package variants support bench-scale trials, while users needing finer particle sizes or batch-specific COA/SDS documentation must request these during quotation.
Positive
- Defined 99.9% purity and -60 mesh specification: The source-listed 99.9% purity and -60 mesh particle specification provide a defined starting material for MLCC, ceramic, crystal, and luminescent materials research.
- Research-scale package options: The 1 g, 5 g, and 10 g package variants allow the same ErN powder to be procured at bench-scale quantities appropriate for formulation screening and small material studies.
Trade-offs
- Coarse particle size may require custom sizing: The -60 mesh specification is a relatively coarse starting material; applications requiring finer or tightly controlled particle-size distributions should specify alternative particle-size options during quotation.
- Batch-specific documentation is request-dependent: COA and SDS are only available upon request, so buyers must explicitly ask for batch-specific purity and safety documentation during procurement.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
