Atomfair Titanium Carbonitride (Ti(C,N)) Powder, 50:50 Grade, FSSS ≤1.0 μm
Product Description
Atomfair titanium carbonitride (Ti(C,N)) powder is supplied as a 50:50 composition grade with FSSS ≤1.0 μm particle size, total carbon 10.0 ± 0.5%, nitrogen 11.3 ± 0.5%, and titanium ≥78.0%. It is intended for cermet materials research.
|
Technical Specifications
|
||||||||||||||||||||||||||
|
Customization & Ordering
Custom particle-size and composition requirements may be evaluated for selected grades upon request. Alternative package sizes may also be available. Minimum order quantities, pricing, and lead times vary by specification and will be confirmed during technical review and quotation.
Key Features and Advantages
- Defined 50:50 composition grade with FSSS ≤1.0 μm particle size.
- Total carbon 10.0 ± 0.5%, nitrogen 11.3 ± 0.5%, and titanium ≥78.0%.
- Dark grey powder format for cermet materials research.
APPLICATION SCOPE: cermet materials research
DOCUMENTATION: COA and SDS can be provided upon request for batch-specific confirmation. Additional documentation requirements may be discussed before order confirmation.
LABORATORY PROCUREMENT SUPPORT
For grade selection, particle-size confirmation, documentation support or custom specification review, contact our technical sales team.
What is the typical carbon-to-nitrogen ratio in Atomfair 50:50 grade Ti(C,N) powder and how does it influence cermet properties?
The 50:50 grade Ti(C,N) powder has a total carbon content of 10.0 ± 0.5% and nitrogen content of 11.3 ± 0.5%, corresponding to a near-equimolar ratio. This balanced composition is designed to optimize the hardness and toughness trade-off in Ti(C,N)-based cermets. The powder also has free carbon ≤0.30% and oxygen ≤0.8% to minimize undesirable phases during sintering.
What are the handling and storage requirements for Atomfair Ti(C,N) powder to maintain its quality?
As a fine dark grey powder with FSSS ≤1.0 μm, Ti(C,N) powder should be stored in a dry environment to prevent moisture-related agglomeration. The supplier, Atomfair, can provide a Safety Data Sheet (SDS) upon request for specific handling and storage guidelines. Standard precautions for fine particulate materials, including avoiding dust dispersion and using appropriate PPE, are recommended.
Can Atomfair Ti(C,N) powder be customized for specific particle size or composition requirements?
Yes, the product description states that custom particle-size and composition requirements may be evaluated for selected grades upon request. Alternative package sizes are also available. Pricing and lead times are confirmed during technical review and quotation, allowing researchers to tailor the powder for specific cermet formulations.
Atomfair Ti(C,N) powder with 50:50 grade and ≤1.0 μm particle size offers precisely controlled carbon and nitrogen content for cermet materials research, with low impurity levels. Handling requires care due to fine particle size, and the fixed composition may limit flexibility for non-standard stoichiometries.
Positive
- Defined 50:50 composition with fine particle size: The powder has a controlled 50:50 Ti(C,N) grade with FSSS ≤1.0 μm, total carbon 10.0±0.5%, nitrogen 11.3±0.5%, and titanium ≥78.0%, providing consistent phase composition for cermet research.
- Low impurity levels for consistent properties: Tight specifications on free carbon (≤0.30%), oxygen (≤0.8%), and iron (≤0.1%) minimize contamination effects in cermet synthesis.
Trade-offs
- Fine powder handling requirements: The ≤1.0 μm particle size requires careful handling to avoid dust generation and potential agglomeration, and may necessitate inert atmosphere processing for optimal results.
- Fixed 50:50 grade limits compositional flexibility: The standard product is a 50:50 composition grade; custom ratios require evaluation and may involve minimum order quantities and lead times, limiting rapid iteration for varying stoichiometries.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
